Format: Log Type - Time(microsec) - Message - Optional Info Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic S - QC_IMAGE_VERSION_STRING=BOOT.MXF.2.5.3-00337.1-KAANAPALI-1.161181.8 S - IMAGE_VARIANT_STRING=SocMolokaiLAA S - OEM_IMAGE_VERSION_STRING=ip-10-195-203-107 S - Boot Interface: UFS S - Secure Boot: Off S - Boot Config @ 0x221c8600 = 0x00000001 S - JTAG ID @ 0x221c8744 = 0x002fd0e1 S - OEM ID @ 0x221c8700 = 0x000002e8 S - Serial Number @ 0x221c8610 = 0x0000047b8e1ff83d S - OEM Config Row 0 @ 0x221c2158 = 0x0000000000000000 S - OEM Config Row 1 @ 0x221c2160 = 0x000002e800000000 S - Feature Config Row 0 @ 0x221c2188 = 0x0000000000000000 S - Feature Config Row 1 @ 0x221c2190 = 0x7000000000000000 S - OEM LCS:PROD S - Core 0 Frequency, 2016 MHz S - PBL Patch Ver: 3 S - PBL freq: 600 MHZ S - Cluster: 0, Core: 0 S - -------------------------------------------------- PBL Timestamps (in usecs)(,version/bytes) -------------------------------------------------- CPBL Start: 155 CPBL HW INIT Start: 473 CPBL HW INIT End: 3621 CPBL APPS Reset Start: 3668 CPBL APPS Sec Packet Init Start: 3795 CPBL APPS Sec Packet Init End: 3803 CPBL APPS Init Start: 3818 CPBL APPS Cache Init Start: 4140 CPBL APPS Cache Init End: 4175 CPBL APPS Core PWRUP Start: 4231 CPBL APPS Core PWRUP End: 4285 CPBL APPS Init End: 4300 CPBL APPS Reset End: 4311 APBL start: 4328,16777474 CPBL Exit: 4371 APBL Cold Boot start4635 APBL Boot Media Detect Start: 9281 APBL flash init stage 1 complete: 11803 APBL flash init stage 2 complete: 36415 APBL flash init stage 3 complete: 49360 APBL Boot Media Detect End: 59990 APBL SHELF Load+Auth Start: 59991 APBL ELF MD Load Start: 62820 APBL ELF MD Load End: 63328 APBL ELF Seg Load Start: 63330 APBL ELF Seg Load End: 65151,19184 APBL SEQ Valid Set: 65173 APBL SEQ SA ACK Rcvd: 67278 APBL ELF MD Load Start: 68923 APBL ELF MD Load End: 70580 APBL ELF Auth Start: 70583 APBL ELF Auth End: 77101 APBL ELF Seg Load Start: 77103 APBL ELF Seg Load End: 79003,43760 APBL ELF Seg Verify Start: 79005 APBL ELF Seg Verify End: 80271 APBL ELF MD Load Start: 81546 APBL ELF MD Load End: 83283 APBL ELF Auth Start: 83285 APBL ELF Auth End: 89756 APBL ELF Seg Load Start: 89758 APBL ELF Seg Load End: 96586,207936 APBL ELF Seg Verify Start: 96588 APBL ELF Seg Verify End: 100145 APBL ELF MD Load Start: 101420 APBL ELF MD Load End: 103130 APBL ELF Auth Start: 103131 APBL ELF Auth End: 109630 APBL ELF Seg Load Start: 109631 APBL ELF Seg Load End: 120353,1162208 APBL ELF Seg Verify Start: 120353 APBL ELF Seg Verify End: 123120 APBL SHELF Load+Auth End: 123193 APBL TME PBL Exit: 123195 APBL XBL_SC Exit Check: 123596 APBL XBL_SC Exit Ack: 154560 APBL Exit: 154563 B - 155153 - SBL1, Start B - 189740 - SBL1 BUILD @ 07:03:31 on May 27 2026 B - 189923 - usb: usb_eud_serial , 0x8e1ff83d D - 275 - sbl1_hw_init D - 1464 - media_init:1 B - 191662 - XBL_AC_CFG - Image Load, Start D - 9882 - Auth Metadata D - 32086 - XBL_AC_CFG - Image Loaded, Delta - (39680 Bytes) B - 223748 - APDP - Image Load, Start D - 183 - APDP - Image Loaded, Delta - (64 Bytes) D - 30 - boot_dload_dump_security_regions D - 0 - EUD Init D - 0 - blacklist enable D - 4148 - DP_Milestone D - 2989 - Auth Metadata D - 5521 - sbl1_xblconfig_init B - 233630 - XBL Config - Image Load, Start D - 2928 - boot_pre_ddr_dtb_load D - 2836 - tsens_init_if D - 366 - boot_check_device_temp B - 261324 - PM: PM_DT_PARSING_ERR: charger B - 261751 - BUS: 0, PMIC A:2.1 B:2.1 D:2.0 F:2.0 G:2.0 H:2.1 I:2.0 K:2.0 B - 261751 - BUS: 1, PMIC B - 264313 - PM: OEM_PSI pre-device-opsi Start B - 265228 - PM: OEM_PSI pre-device-opsi Done B - 266204 - PM: Reset by PSHOLD B - 266204 - PM: Reset Type: Hard Reset B - 266204 - PM: PON by SYSOK B - 303475 - PM: SET_VAL:Skip B - 303749 - PM: PSI: b0x10_v0x16 OTP: v0x10 B - 307074 - PM: OEM_PSI post-device-opsi Start B - 307958 - PM: OEM_PSI post-device-opsi Done B - 308019 - PM: Device Init # SPMI Transn: 3761 err=0x0 D - 68259 - pm_device_init, Delta B - 308019 - pm_driver_init, Start B - 320128 - PM: Driver Init # SPMI Transn: 965 D - 12109 - pm_driver_init, Delta D - 80368 - sbl1_pmic_init D - 0 - EUD Post PMIC Init D - 35136 - media_init:2 B - 413214 - UFS Spec Version: 4.10 B - 417453 - UFS INQUIRY ID: XBSTOR XBUSC1B59AATH2 0304 B - 419649 - UFS Boot LUN: 1 B - 422882 - UFS Total Size: 256 GB B - 434930 - UFS Gear 1 due to low battery B - 438102 - UFS Speed: Gear 1 Lane 2 Rate B D - 87413 - media_init:3 D - 457 - boot_wdog_disable_check B - 443683 - LOG_START-0000000090 D - 1342 - init-logstomedia D - 0 - shrm_load_cancel B - 445086 - SHRM - Image Load, Start D - 9882 - Auth Metadata D - 15098 - SHRM - Image Loaded, Delta - (176218 Bytes) B - 460580 - CDT not found in any storage media, using defaults D - 396 - boot_cdt_init B - 461160 - CDT - Image Load, Start B - 461465 - CDT not found in any storage media D - 9607 - sbl1_hw_platform_pre_ddr B - 471713 - usb: chgr - CDP_CHARGER B - 472018 - usb: qusb_dci_eud_init B - 473299 - usb: usb_shared_hs_phy_init dt_error , 0x6 B - 673562 - usb: usb_dp_toggled_for_cdp , 0xc8 B - 674812 - PM: Get RID from SDAM: 101000 B - 675117 - PM: Battery ID: 101000 Ohm B - 680119 - PM: VBAT: 3491mV IBAT: 0mA T: 26C B - 680455 - PM: CHG Init # SPMI Transn: 229 err=0x0 B - 680760 - vsense_init, Start D - 0 - vsense_init, Delta B - 681400 - CPR- Global: rev 1,vpid 1 Local: rev 1,vpid 1 D - 221186 - sbl1_hw_pre_ddr_init D - 519 - boot_fedl_check D - 0 - boot_dload_handle_forced_dload_timeout D - 610 - sbl1_load_ddr_training_data B - 695095 - Pre_DDR_clock_init, Start D - 0 - Pre_DDR_clock_init, Delta D - 1677 - sbl1_ddr_set_params B - 696162 - sbl1_ddr_init, Start B - 696620 - DDR: LLCC Qultivate Vector = 0 B - 701439 - DDR_INIT with shrm.elf B - 701744 - INFO: PXI based read & write training enabled B - 718915 - eCDT MRR - Data Starting Address: 0x3104E500 B - 724649 - Returning from DDR_FW_Init B - 724954 - ddr_init = 1 cold boot D - 28792 - sbl1_ddr_init, Delta B - 725595 - DSF version = 007.00.00 B - 725900 - Manufacturer ID = 0x8f, Device Type = 0x8 B - 726205 - Rank 0 size = 6144 MB, Rank 1 size = 6144 MB D - 30897 - sbl1_ddr_init D - 0 - store-logstomedia B - 728126 - do_ddr_training, Start B - 786503 - DDR: Start of DDR Training Restore B - 793091 - Returning from DDR_FW_Restore B - 793396 - DDR: End of DDR Training Restore D - 65331 - do_ddr_training, Delta B - 794647 - SecLib initiate DARE sequence start B - 797392 - Enable default ARM features B - 797697 - MPAM_EN:1 MTE_EN:0 SME_EN:1 SVE_EN:1 B - 798734 - SecLib initiate DARE sequence successful B - 811361 - Returning from DDR_FW_Exit B - 812123 - DDR:set boot freq from device tree B - 812428 - Current DDR Freq = 2096 MHz B - 812733 - Max enabled DDR Freq = 4780 MHz D - 85369 - xbl_trng_ddi_seq D - 0 - store-logstomedia D - 0 - XBL DDR QB milestone call D - 1403 - xbl_map_smem D - 0 - boot_smem_debug_init D - 5734 - sbl1_smmu_init D - 8601 - boot_smem_init D - 305 - boot_ddr_share_data_to_aop D - 122 - boot_populate_ddr_details_shared_table D - 0 - boot_recovery_partitions_info_smem_init B - 832314 - MIPC & DARE DISABLED D - 335 - boot_update_ram_partition_table B - 832924 - Pimem init cmd, entry B - 836279 - (50000e) D - 3355 - Pimem init cmd, exit B - 850340 - External heap init, Start B - 850950 - External heap init, End D - 28426 - sbl1_post_ddr_init D - 0 - sbl1_hw_init_secondary B - 861991 - DDR - Image Load, Start D - 3752 - boot_post_ddr_dtb_load D - 0 - imageinfo_init D - 0 - boot_fmf_license_load_and_verify B - 867206 - HYP_AC_CFG - Image Load, Start D - 10035 - Auth Metadata D - 13207 - HYP_AC_CFG - Image Loaded, Delta - (72448 Bytes) B - 880809 - usb: UFS Serial - fcffd167 D - 457 - boot_usb_update_serial D - 0 - boot_usb_handle_charger D - 305 - sbl1_hw_platform_smem D - 0 - ramdump_load_cancel B - 882639 - RamDump - Image Load, Start D - 305 - RamDump - Image Loaded, Delta - (0 Bytes) B - 883249 - QUPFW - Image Load, Start D - 10065 - Auth Metadata D - 26139 - QUPFW - Image Loaded, Delta - (51707 Bytes) B - 956266 - DCP_DTB - Image Load, Start D - 2989 - Auth Metadata D - 12048 - DCP_DTB - Image Loaded, Delta - (23845 Bytes) B - 968619 - DCP - Image Load, Start D - 3111 - Auth Metadata D - 22143 - DCP - Image Loaded, Delta - (707801 Bytes) D - 0 - boot_update_abnormal_reset_status D - 0 - boot_cache_set_memory_barrier D - 30 - boot_smem_alloc_for_minidump D - 0 - boot_shrm_mini_dump_init D - 61 - boot_minidump_register_regions D - 183 - boot_smem_store_pon_status D - 31 - boot_clock_init_rpm D - 0 - boot_vsense_copy_to_smem D - 335 - sbl1_tlmm_init D - 0 - sbl1_efs_handle_cookies B - 995520 - PM: Orne attach B - 1022024 - PM: PM Total Mem Allocated: 11498 D - 27755 - sbl1_pm_aop_pre_init_wrapper B - 1023549 - AOP Config - Image Load, Start D - 3019 - Auth Metadata D - 11560 - AOP Config - Image Loaded, Delta - (18391 Bytes) B - 1035444 - AOP - Image Load, Start D - 10095 - Auth Metadata D - 36753 - AOP - Image Loaded, Delta - (340958 Bytes) B - 1072502 - TZ_AC_CFG - Image Load, Start D - 9974 - Auth Metadata D - 13115 - TZ_AC_CFG - Image Loaded, Delta - (56064 Bytes) B - 1085922 - SOCCP_DTB - Image Load, Start D - 2989 - Auth Metadata D - 11864 - SOCCP_DTB - Image Loaded, Delta - (87896 Bytes) B - 1098091 - SOCCP - Image Load, Start D - 3080 - Auth Metadata D - 50996 - SOCCP - Image Loaded, Delta - (2473261 Bytes) B - 1149758 - SOCCP_DEBUG - Image Load, Start D - 10004 - Auth Metadata D - 30714 - SOCCP_DEBUG - Image Loaded, Delta - (43198 Bytes) D - 0 - dump dependency ready B - 1181326 - SOCCP_DCD - Image Load, Start D - 3019 - Auth Metadata D - 5764 - SOCCP_DCD - Image Loaded, Delta - (12612 Bytes) B - 1187395 - PDP_CDB - Image Load, Start D - 2989 - Auth Metadata D - 5673 - PDP_CDB - Image Loaded, Delta - (4729 Bytes) B - 1193404 - PDP - Image Load, Start D - 10096 - Auth Metadata D - 24796 - PDP - Image Loaded, Delta - (349980 Bytes) D - 0 - boot_prepare_cpucp B - 1218780 - CPUCP_DTB - Image Load, Start D - 3050 - Auth Metadata D - 6100 - CPUCP_DTB - Image Loaded, Delta - (8792 Bytes) B - 1225154 - CPUCPFW - Image Load, Start D - 10218 - Auth Metadata D - 24187 - CPUCPFW - Image Loaded, Delta - (442300 Bytes) B - 1249646 - PGS-44729: CPBL patch detected D - 274 - boot_reset_cpucp B - 1250195 - TZ_QTI_Config - Image Load, Start D - 10065 - Auth Metadata D - 14091 - TZ_QTI_Config - Image Loaded, Delta - (117504 Bytes) B - 1264560 - QSEE Dev Config - Image Load, Start D - 3111 - Auth Metadata D - 7900 - QSEE Dev Config - Image Loaded, Delta - (53160 Bytes) B - 1272765 - QSEE - Image Load, Start D - 10919 - Auth Metadata D - 92506 - QSEE - Image Loaded, Delta - (4157936 Bytes) D - 1372 - sbl1_hw_play_vibr D - 122 - sbl1_smmuv2_fault_scan B - 1367589 - SEC - Image Load, Start D - 397 - SEC - Image Loaded, Delta - (64 Bytes) B - 1368260 - QHEE - Image Load, Start D - 10157 - Auth Metadata D - 30744 - QHEE - Image Loaded, Delta - (1510336 Bytes) B - 1399279 - APPSBL - Image Load, Start D - 3050 - Auth Metadata D - 58194 - APPSBL - Image Loaded, Delta - (5246840 Bytes) B - 1458388 - SBL1, End D - 1303540 - SBL1, Delta S - Flash Throughput, 148719 KB/s (16359138 Bytes, 110506 us) S - DDR Frequency, 2092 MHz UEFI Start [ 1646] - 0x0C4C01000 [ 1660] Sec.efi ASLR : ON DEP : ON (RTB) Timer Delta : +0 mS RAM Entry 0 : Base 0x0080000000 Size 0x0001240000 RAM Entry 1 : Base 0x0081300000 Size 0x0000100000 RAM Entry 2 : Base 0x0081960000 Size 0x0000C40000 RAM Entry 3 : Base 0x00D6E00000 Size 0x0001229000 RAM Entry 4 : Base 0x00D8800000 Size 0x0000000000 RAM Entry 5 : Base 0x00DFBB0000 Size 0x0020450000 RAM Entry 6 : Base 0x0880000000 Size 0x002F8FE000 RAM Entry 7 : Base 0x08B0000000 Size 0x0009900000 RAM Entry 8 : Base 0x0980000000 Size 0x0180000000 RAM Entry 9 : Base 0x08C0000000 Size 0x00C0000000 RAM Entry 10 : Base 0x08B9B00000 Size 0x0001E00000 RAM Entry 11 : Base 0x0082600000 Size 0x0053DD0000 RAM Available : 12067 MB (0x02F23C7000) RAM Installed : 12288 MB (0x0300000000) Using DT Legeacy Lib start creat dtb hash table..blob address[81A04000] end create dtb hash table..creat hash table cost time:[18979]..total node:[1062] DTB config : client[0]..trace[0]..verbose[0] Minidump : ON WARN: Functional cores hardcoded for target Multithread : ON (Lib ver 1.3) CPU Cores : 8 (init 2) Init 1 aux cores of 7 Init CPU core 1 Continue booting UEFI on Core 0 > Scheduler up on Core 1 CONF File : uefiplatLA.cfg UEFI Ver : 6.0.260804.BOOT.MXF.2.5.3-00337.1-KAANAPALI-1 Build Info : 64b Aug 4 2026 11:23:40 Boot Device : UFS PROD Mode : FALSE Retail : FALSE - 0x0C1EC1000 [ 2151] DxeCore.efi Loading DxeCore at 0x00C1EC1000 EntryPoint=0x00C1EC2000 - 0x0C1E56000 [ 2153] EnvDxeEnhanced.efi - 0x0C1E4D000 [ 2154] RscRtDxe.efi - 0x0C1986000 [ 2154] SCHandlerRtDxe.efi - 0x0C1E41000 [ 2154] TimestampDxe.efi - 0x0C197E000 [ 2154] RuntimeDxe.efi - 0x0C1E39000 [ 2154] QcomWDogDxe.efi HW Wdog Setting from PCD : Enabled HW Wdog Enabled - 0x0C1E2A000 [ 2154] ArmCpuDxe.efi - 0x0C1E21000 [ 2155] ArmGicDxe.efi - 0x0C1E1A000 [ 2155] MetronomeDxe.efi - 0x0C1E13000 [ 2155] ArmTimerDxe.efi - 0x0C1E09000 [ 2155] MotBootFlagsDxe.efi - 0x0C1E01000 [ 2155] OfflineCrashDumpDxe.efi - 0x0C1DED000 [ 2155] MotBuildConfigDxe.efi - 0x0C1DE3000 [ 2155] SmemDxe.efi - 0x0C1D92000 [ 2156] DALSys.efi - 0x0C1D8A000 [ 2156] HWIODxeDriver.efi - 0x0C1D7D000 [ 2156] ChipInfo.efi - 0x0C1D75000 [ 2156] PlatformInfoDxeDriver.efi - 0x0C1D68000 [ 2157] HALIOMMU.efi - 0x0C1D54000 [ 2159] ULogDxe.efi - 0x0C1D4C000 [ 2159] CmdDbDxe.efi - 0x0C1D44000 [ 2159] PwrUtilsDxe.efi - 0x0C1D31000 [ 2160] NpaDxe.efi - 0x0C1D21000 [ 2160] RpmhDxe.efi - 0x0C1D16000 [ 2160] MailboxDxe.efi mbox_os_init: Failed to locate SCM protocol for Mailbox 14 **** - 0x0C1D0C000 [ 2160] QcomScmiDxe.efi - 0x0C1D00000 [ 2161] CalibrationDxe.efi SLT Platform Key not found: 14 SCMI error: ProtocolId = 0x80, MessageId = 0x13, error = -1 Warning: calibration complete notification to PDP0 failed SCMI error: ProtocolId = 0x80, MessageId = 0x13, error = -1 Warning: calibration complete notification to PDP1 failed - 0x0C1CEE000 [ 2199] VcsDxe.efi - 0x0C193C000 [ 2200] ClockDxe.efi - 0x0C1CBD000 [ 2209] ICBDxe.efi - 0x0C1933000 [ 2210] ShmBridgeDxeLA.efi - 0x0C1925000 [ 2210] ScmDxeCompat.efi IsArmV8Smc() return TRUE - 0x0C1919000 [ 2212] DALTLMM.efi - 0x0C1911000 [ 2212] Qup.efi Lockinit failed Bad Buffer Size - 0x0C18F5000 [ 2213] I2C.efi - 0x0C18E7000 [ 2213] SPMI.efi - 0x0C18DE000 [ 2242] ResetRuntimeDxe.efi - 0x0C189F000 [ 2242] PmicDxe.efi BUS_ID 0: PM0: 74, PM1: 73, PM3: 70, PM5: 70, PM6: 70, PM7: 86, PM8: 70, PM10: 72, BUS_ID 1: =============== PM0 PON REASONS =============== ON_REASON: "PON_SEQ" OFF_REASON: PON_REASON1: "USB_CHG" "HARD_RESET" POFF_REASON1: "PS_HOLD" WARM_RESET_REASON1: =============== SPARE REGISTERS =============== DVDD_0: 0x04: "FASTBOOT" DVDD_1: 0x00 XVDD_0: 0x00: SOFT_0: 0x04: "FASTBOOT_MODE" - 0x0C1894000 [ 2276] DiskIoDxe.efi - 0x0C1887000 [ 2276] PartitionDxe.efi - 0x0C1880000 [ 2276] EnglishDxe.efi - 0x0C1875000 [ 2276] FvSimpleFileSystem.efi - 0x0C1848000 [ 2276] UFSDxe.efi Primordial_getRegionInfo..... addr 0xC1BC6000 len 0x23000 perm 0x20000006..... Primordial_getRegionInfo..... addr 0xC1B84000 len 0x41000 perm 0x20000006..... - 0x0BF10C000 [ 2334] Fat.efi - 0x0BF0E9000 [ 2334] TzDxeLA.efi - 0x0BF057000 [ 2336] VariableDxe.efi Embedded Commonlibs loaded LoadSecureApps: Load app from partition(keymaster): Status = 0x0, AppId = 4294901761 variable policy engine disabled - 0x0BF0FD000 [ 2459] ProvDxe.efi LoadImageFromPartition(Prov) calling seccussfully, return: Success - 0x0BDBF6000 [ 2467] MotStorageDxe.efi - 0x0BDC1A000 [ 2468] MotUtagsDxe.efi - 0x0BDBC9000 [ 2468] MotUtagsDictDxe.efi - 0x0BDB76000 [ 2468] MotHwIdDxe.efi [ 2468] HWID GPIOs (105, 107, 0) [ 2468] motorola_id_init, Start [ 2530] product ID = J, hardware ID = E - 0x0BDB67000 [ 2537] WatchdogTimer.efi - 0x0BDB4C000 [ 2537] SecurityStubDxe.efi - 0x0BDB6E000 [ 2537] EmbeddedMonotonicCounter.efi - 0x0BDB43000 [ 2538] RealTimeClock.efi InitializeRealTimeClock: using default timezone/daylight settings - 0x0BDB1C000 [ 2539] DevicePathDxe.efi - 0x0BDB3B000 [ 2539] CapsuleRuntimeDxe.efi - 0x0BDAD7000 [ 2539] HiiDatabase.efi - 0x0BDB32000 [ 2540] FontDxe.efi - 0x0BD9FA000 [ 2542] QcomBds.efi Mounted FAT Volume: logfs Logger: saving log file CurBoot.txt PMIC RTC TimeInSeconds 86379 Time offset 1786630286 [ 2555] get_mbm_fdt: Found best fdt @ 0x35F0 Logger: suspicious log piece, StartPos 0x81CE4000 EndPos 0x81CE887D Logger: saving log file Log89.txt, cycle 89, BootCycleSuccess 88 Logger: suspicious huge Log piece size 0x487D - 0x0BDA42000 [ 2563] SPI.efi - 0x0BDA7C000 [ 2563] HSUART.efi - 0x0BD9D1000 [ 2563] GpiDxe.efi - 0x0BDA90000 [ 2566] VerifiedBootDxe.efi Smc Invoke call failed ret 0xB QCOM_Hibernate_CacheData: IClientEnv_open - Fail, nReturn = 11 - 0x0BDA73000 [ 2567] RscDxe.efi Error: Image at 000BDA73000 start failed: No mapping - 0x0BDA73000 [ 2569] IPCCDxe.efi - 0x0BDAB0000 [ 2570] FMFDxe.efi Smc Invoke call failed ret 0x10 Device SKU-ing failed - feature is disabled! If this feature is required, please enable "OEM_SKU_ready" via devcfg. RemoteObj_invoke count 1 FMF DeferredSKU failed - 7 Error: Image at 000BDAB0000 start failed: Device Error - 0x0BD988000 [ 2573] SdccDxe.efi - 0x0BD9EE000 [ 2583] DDRInfoDxe.efi - 0x0BD9B2000 [ 2584] MotCoreServicesDxe.efi - 0x0BD97A000 [ 2585] AbDxe.efi Multi Slot boot is supported - 0x0BD9E6000 [ 2586] FeatureEnablerDxe.efi Smc Invoke call failed ret 0x17 QseeResponse->result = 0xE Status = 0x7 Smc Invoke call failed ret 0x17 QseeResponse->result = 0xE Status = 0x7 Smc Invoke call failed ret 0x17 QseeResponse->result = 0xE Status = 0x7 Smc Invoke call failed ret 0x17 QseeResponse->result = 0xE Status = 0x7 LoadImageFromPartitionUsingGuid Failed: 14 Failed to start featenabler_a TA, status = 14 - 0x0BD8A1000 [ 2588] DisplayDxe.efi [ 2589] get_mbm_fdt: Found best fdt @ 0x35F0 Unable to get DisplayPanelDetectionResult, Not Found Unable to get primary Panel Detection Status success to locate pmic pwron protocol: Success long_key_check_in_advence is set PM: PM_DT_PARSING_ERR: charger DisplayDxe: sPlatformParams.DualDisplay = 0 DisplayDxe: Panel0 index get from dts (Index: 0) DisplayDxe: Panel0 index get from dts (Index: 0)--(boe_ili97701A_682_1440x3168_dsc_cmd_v1) MotDynamicDSIPanelDetection readback = 0x2 0x5 0x1 0x92 Skipping reading Reg: 0xA1 for Panel ID 1 as already readed MotDynamicDSIPanelDetection readback = 0x2 0x5 0x1 0x92 MotDynamicDSIPanelDetection readback_ver = 0x3 0x0 0x0 0x0 Detected panel name boe_ili97701A_682_1440x3168_dsc_cmd_bd_v1 & version:000365D2 Panel 0 auto detection status: 2 DisplayDxe: Resolution 1440x3168 (PhysConnect 9) DisplayDxe_SetMode set resolution 1440x3168 for display 0 DisplayDxe_SetMode MDPSetMode fboffset=FC800000 wh=1440:3168 for display 0 - 0x0BD965000 [ 2698] PILProxyDxe.efi - 0x0BD920000 [ 2698] PILDxe.efi - 0x0BD95B000 [ 2704] SPSSDxe.efi SPSSLib:: SPSSLib_CreatePMICClients vreg_sp npa client creation failed! SPSSLib:: SPSSLib_LoadSPSS Creating PMIC clients failed: 0xE Error: Image at 000BD95B000 start failed: Not Found - 0x0BD942000 [ 2706] GlinkDxe.efi - 0x0BD95D000 [ 2707] PrintDxe.efi - 0x0BD893000 [ 2707] PmicGlinkDxe.efi - 0x0BD953000 [ 2707] UsbPwrCtrlDxe.efi UsbPwrCtrlLibPmSchg_GetChgPmicInfo::UsbPwrCtrlLibPmSchg_GetChgPmicInfo PortNums = 1 - 0x0BD850000 [ 2708] QcomChargerDxeLA.efi 2, ChargerLib:: ChargerLib_InitFileLog ChargerLib:: ChargerLib_InitFileLog InitFileLog SUCCESS MaxLogFileSize = (400000) ULogFile: Max log file size is 0x400000 Logs will be stored in LOGFS:\ ULogFile_IncrementBootCount: Couldn't open boot count file ULogFile_Open: ERROR: Failed to open file LOGFS:\ChargerLog.txt 3, ChargerLib:: ChargerLibTarget_HWInit PlatformType = 8 has Static PlatHWConfig = 1 3, ChargerLib:: ChargerLibTarget_HWInit PlatformType = 8: ChargerHW = 1, GaugeHW = 1 3, QcomChargerDxe:: ChargerPlatform_Init Successfully initialized ChargerLibCommon Success - 0x0BD87E000 [ 3147] ChargerExDxe.efi - 0x0BCBF0000 [ 3148] UsbfnDwc3Dxe.efi - 0x0BD888000 [ 3148] XhciPciEmulation.efi - 0x0BCBD9000 [ 3149] XhciDxe.efi - 0x0BCBC4000 [ 3150] UsbBusDxe.efi - 0x0BD871000 [ 3150] UsbKbDxe.efi - 0x0BCC0E000 [ 3151] UsbMassStorageDxe.efi - 0x0BCBA7000 [ 3151] UsbDeviceDxe.efi - 0x0BCB74000 [ 3152] UsbConfigDxe.efi UsbConfigInit: USB platform 8, ver 65536, sub 0 qcom repeater found : 0x0 usb_redriver_init, Disable: 0x0 3, ChargerLib:: ChargerLibTarget_GetBatteryID batt_id_from_sdam = 101000 3, ChargerLib:: ChargerLibTarget_GetBatteryID BATT_ID_2 = 101000 3, ChargerLib:: ChargerLib_GetBatteryID BATT_ID_2 = 101000 3, ChargerLib:: ChargerLib_GetBatteryType Battery type = 0 3, ChargerLib:: ChargerLibTarget_IsChargingSupported PlatformType = 8: ChargerHW = 1, GaugeHW = 1 3, ChargerLib:: ChargerLibTarget_IsChargingSupported Support Charging = 1 3, ChargerLib:: ChargerLib_IsChargingSupported Support Charging = 1 ChargerExProtocol:: EFI_ChargerExGetChargerPresence USBIn source detected UsbConfigInit: UsbPwrCtrl No. of Ports = 1 ConnectSts : Attach, Data Role : UFP (DEVICE Mode), Lane : CC1, CoreNum : 0 Reset notification not located, Status:Not Found LocateProtocol failed, calling CreateEvent and RegisterProtocolNotify Status:Protocol Error - 0x0BCBB9000 [ 3157] ButtonsDxe.efi ButtonsDxeTest: Keypress SDAM data payload 0 - 0x0BCB9D000 [ 3159] TsensDxe.efi - 0x0BCB49000 [ 3160] CPRDxe.efi - 0x0BCAEA000 [ 3168] UCDxe.efi - 0x0BCB6B000 [ 3175] RngDxe.efi - 0x0BCB63000 [ 3175] SimpleTextInOutSerial.efi - 0x0BCB34000 [ 3176] ConPlatformDxe.efi - 0x0BCB19000 [ 3177] ConSplitterDxe.efi - 0x0BCB3E000 [ 3178] GraphicsConsoleDxe.efi - 0x0BCAE0000 [ 3178] ASN1X509Dxe.efi - 0x0BCAD6000 [ 3179] SecRSADxe.efi - 0x0BCAB5000 [ 3180] MbmModeDxe.efi [ 3181] get_mbm_fdt: Found best fdt @ 0x35F0 EXT4 features: 0x2C, 0x42, 0x7B root inode: i_flags 0x80000 Go to fastboot mode due to spare reg flag - 0x0BCACF000 [ 3183] MotSolDxe.efi EnvDxe SplashScreenRenderCallbacknMmiRenderSplashScreen: logo=0 Primary display resolution: 1440 x 3168 DAP version: 10,2 (flags: 0x3) DAP sector size: 0x200 Blkdev: [0] super, sz 0x54D800000, start sec 0x800 Groups: [0] default, sz 0x0 [1] mot_dp_group_a, sz 0x54D400000 free sz: 0x4BF9C0000 [2] mot_dp_group_b, sz 0x54D400000 free sz: 0x4BF9C0000 Partitions: [0] odm_a, a=0x1, i=0, n=1, g=1, sz 0x1166D000 [1] odm_b, a=0x1, i=1, n=0, g=2, sz 0x0 [2] product_a, a=0x1, i=1, n=1, g=1, sz 0x10179000 [3] product_b, a=0x1, i=2, n=0, g=2, sz 0x0 [4] system_a, a=0x1, i=2, n=1, g=1, sz 0x20911000 [5] system_b, a=0x1, i=3, n=1, g=2, sz 0x354000 [6] system_dlkm_a, a=0x1, i=4, n=1, g=1, sz 0x319D000 [7] system_dlkm_b, a=0x1, i=5, n=0, g=2, sz 0x0 [8] system_ext_a, a=0x1, i=5, n=1, g=1, sz 0x123ED000 [9] system_ext_b, a=0x1, i=6, n=0, g=2, sz 0x0 [10] vendor_a, a=0x1, i=6, n=1, g=1, sz 0x34517000 [11] vendor_b, a=0x1, i=7, n=0, g=2, sz 0x0 [12] vendor_dlkm_a, a=0x1, i=7, n=1, g=1, sz 0x1B54000 [13] vendor_dlkm_b, a=0x1, i=8, n=0, g=2, sz 0x0 [ 3185] get_mbm_fdt: Found best fdt @ 0x35F0 load_logo find [logo_boot], match_idx=0 load_logo name=[logo_boot], w:h=[1440:3168] DisplayUtils: Invalid inputs of horizontal / vertical resolution. RenderSplashScreen: primary render error code Invalid Parameter Primary displayId=0, logo size=13685814, flags=0 Secondary display resolution: 0 x 0 EnvDxe Render Callback - 0x0BCA9B000 [ 3192] BacklightDxe.efi PM_DEVICE_1 GetBatteryStatus: Voltage = 3496 mV [ 3194] get_mbm_fdt: Found best fdt @ 0x35F0 BacklightDxe PowerKey_powerup_Threshold = 3200 - 0x0BCB26000 [ 3195] RmVmDxe.efi - 0x0BCA92000 [ 3196] QRKSDxe.efi RemoteObj_invoke count 1 - 0x0BCA8B000 [ 3211] PsStateDxe.efi RemoteObj_invoke count 1 - 0x0BCA76000 [ 3212] Smp2pDxe.efi - 0x0BCA4D000 [ 3213] UsbMsdDxe.efi - 0x0BCA6E000 [ 3213] UsbInitDxe.efi - 0x0BCA2E000 [ 3214] FvDxe.efi - 0x0BCA66000 [ 3215] ParserDxe.efi BDS Entry [ 3215] WaitParallelThreads InIt [ 3216] MDPCheckFpsFuse: Panel refresh rate (0 fps) is beyond SW Fuse (0 fps)! EnvDxe SplashScreenRenderCallbacknMmiRenderSplashScreen: logo=0 Primary display resolution: 1440 x 3168 load_logo find [logo_boot], match_idx=0 load_logo name=[logo_boot], w:h=[1440:3168] Primary displayId=0, logo size=13685814, flags=0 Secondary display resolution: 0 x 0 EnvDxe Render Callback CallBack: 0xC1E57FA0 [ 3257] EnvDxeEnhanced.dll WARN: ExecTime: 20 ms Reset notification not located, Status:Not Found Boot Cycle : 35 Run Cycle : 15 UEFI Ver : 6.0.260804.BOOT.MXF.2.5.3-00337.1-KAANAPALI-1 Platform : MTP Subtype : 0 Boot Device : UFS Chip Name : SM8845 Chip Ver : 1.0 Chip Num : 0x8E1FF83D Chip ECID : 0x047B8E1FF83D SKU ID : 0x2 P_Code : 0x1 TME_SEQ_PATCH_VERSION : 0x1 Boot Core : 1651 MHz ----------------------------- QUANTUM SDK DT node not found: -1, skipping.. Quantum Sdk failed to load. Status : Device Error Successfully read Quantum entry flag val: 0 pil-abl Done t=58ms s=2ms a=7ms f=47ms d=0ms UEFI Total : 1678 ms POST Time [ 3324] OS Loader Total FreeMem available : 10419 MB Max Contiguos FreeMem available : 9216 MB - 0x0BC430000 [ 3335] MotoBootModule.efi [ 3338] get_mbm_fdt: Found best fdt @ 0x35F0 [ 3339] I - MBM version is MBM-3.0-eletre_factory-981b9c08d595-dirty-260804-WWX36V-835ee2 [ 3339] I - Power up reason is: 0x00004000 ("reboot") detected buffer overflow in StrnCpyS, line 314 detected buffer overflow in StrnCpyS, line 314 GetRunningBLSlotSuffix: Bypassing GUID check for xbl_ac_config_a GetRunningBLSlotSuffix: Bypassing GUID check for tme_config_a GetRunningBLSlotSuffix: Bypassing GUID check for tme_fw_a GetRunningBLSlotSuffix: Bypassing GUID check for xbl_config_a GetRunningBLSlotSuffix: Bypassing GUID check for xbl_a Currently running bootloader is from BOOT LUN: 1, slot: _a/_a Total DDR Size: 0x00000002F23C7000 Locate EFI_SOFTSKU_Protocol failed, Status = (0xE) SSM using extended UID prov: app ID -65533 detected buffer overflow in StrnCpyS, line 314 prov enabled = 1 VB: Non-secure device: Security State: (0xFFF3F) VB: RWDeviceState: Succeed using devinfo! [ 3362] I - SSM: SSM loaded CID=0 [ 3366] I - SOD: initializing... [ 3369] I - SOD: RAM dump feature is enabled [ 3369] I - SOD: RAM dump mode is both [ 3369] E - sod_flags_sponsor: failed to read utag [cmdl] [ 3369] I - read init reboot command failed target_enable_resin_and_kpdpwr_warm_reset: PON access is disabled by DTS! target_disable_resets: PON access is disabled by DTS! [ 3370] RAM: UNKNOWN, LP5, 0x300000000 Bytes [ 3370] C - next_valpair: value size mismatch [ 3437] E - sod_flags_sponsor: failed to read utag [cmdl] [ 3437] E - sod_flags_sponsor: failed to read utag [cmdl] [ 3437] I - Entering fastboot mode [ 3437] I - Fastboot Reason: Reboot mode set to fastboot Fastboot Build Info: Aug 4 2026 11:47:06 UsbStartController: Starting Core 0 in mode: 4 usb_repeater_reset, core_num : 0x0 usb_repeater_reset, core_num : 0x0 0x144: 0x4 0x144: 0xA8 ssusb_phy_init_success lane: 0x0 Fastboot: Initializing... [ 3513] I - Serial number: "N9PC220461" Fastboot: Processing commands [ 3522] E - sod_flags_sponsor: failed to read utag [cmdl] [ 3527] I - SKU: XT2771-1 [ 3529] RAM: UNKNOWN, LP5, 0x300000000 Bytes ChargerExProtocol:: EFI_ChargerExGetChargerPresence USBIn source detected 3, ChargerLib:: ChargerLibTarget_GetBatteryStatus use PmicFgProtocol 3, ChargerLib:: ChargerLibTarget_GetBatteryID batt_id_from_sdam = 101000 3, ChargerLib:: ChargerLibTarget_GetBatteryID BATT_ID_2 = 101000 3, ChargerLib:: ChargerLibTarget_GetBatteryType Battery type = 0 3, ChargerLib:: ChargerLibTarget_GetBatteryID batt_id_from_sdam = 101000 3, ChargerLib:: ChargerLibTarget_GetBatteryID BATT_ID_2 = 101000 ChargerLibTarget_ValidateAndGetOcv: re-estimate using pon_ocv == 3492 mV, set soc=15 3, QcomChargerDxe:: EFI_QcomChargerGetChargerConfig CfgKey = 0 Value = 3300 [ 3535] I - Kernel console : null [ 3535] I - Tools Mode Config: ENABLED Primary display resolution: 1440 x 3168 [ 3536] Using droid_operation load_image name=[dodoeain], w:h=[1440:3168] Primary display resolution: 1440 x 3168 [ 3537] Using arrows load_image name=[arw], w:h=[1440:3168] Primary display resolution: 1440 x 3168 [ 3538] Using start load_image name=[sat], w:h=[1440:3168] CallBack: 0xBC53B980 [ 3539] MotoBootModule.dll WARN: ExecTime: 17 ms USB status: connected ChargerExProtocol:: EFI_ChargerExGetChargerPresence USBIn source detected 3, ChargerLib:: ChargerLibTarget_GetBatteryStatus use PmicFgProtocol 3, ChargerLib:: ChargerLibTarget_GetBatteryID batt_id_from_sdam = 101000 3, ChargerLib:: ChargerLibTarget_GetBatteryID BATT_ID_2 = 101000 3, ChargerLib:: ChargerLibTarget_GetBatteryType Battery type = 0 3, QcomChargerDxe:: EFI_QcomChargerGetChargerConfig CfgKey = 0 Value = 3300 backlight_control: DisplayBacklightBrightnessLevelControl 3 returned error = Unsupported UsbfnDwcCoreCableStatus: Cable Attached get_config_usb_speed_type: get usb speed config node fail Dev_Common_Speed: Dev Bus Speed: High, state 2 Dev_Common_Speed: Dev Bus Speed: High, state 2 Dev_Common_Speed: Dev Bus Speed: High, state 2 [ 25747] I - cmd: getvar:carrier_sku [ 25761] I - cmd: oem config bootmode [ 25887] I - cmd: oem config batt_firstusagedate [ 26028] I - cmd: oem fb_mode_clear [ 26044] I - cmd: oem config factory_kill_timeout 1 ConnectSts : Detach, Data Role : UNKNOWN, Lane : OPEN, CoreNum : 0 HandlePortPartnerXtach: Cable Detach coreNum 0 mode 4 UsbfnDwcCoreCableStatus: Cable Detached USB status: disconnected [ 147960] read factory kill timeout: 1 Auto shutdown timer 1 started! ChargerExProtocol:: EFI_ChargerExGetChargerPresence HARD_RESET = 1 .KPDPWR = 0 PON1 = 0 USB_CHG = 1 DC_CHG 0 CBLPWR = 0 ChargerExProtocol::EFI_ChargerExGetChargerPresence DCIn or USBIn source not detected, wait 200 ms WaitforTimeout Completed ChargerExProtocol::EFI_ChargerExGetChargerPresence DCIn or USBIn source not detected, wait 200 ms WaitforTimeout Completed ChargerExProtocol::EFI_ChargerExGetChargerPresence DCIn or USBIn source not detected, wait 200 ms WaitforTimeout Completed ChargerExProtocol::EFI_ChargerExGetChargerPresence DCIn or USBIn source not detected, wait 200 ms WaitforTimeout Completed ChargerExProtocol::EFI_ChargerExGetChargerPresence DCIn or USBIn source not detected, wait 200 ms WaitforTimeout Completed ChargerExProtocol::EFI_ChargerExGetChargerPresence DCIn or USBIn source not detected, wait 200 ms WaitforTimeout Completed ChargerExProtocol::EFI_ChargerExGetChargerPresence DCIn or USBIn source not detected, wait 200 ms WaitforTimeout Completed ChargerExProtocol::EFI_ChargerExGetChargerPresence DCIn or USBIn source not detected, wait 200 ms WaitforTimeout Completed ChargerExProtocol::EFI_ChargerExGetChargerPresence DCIn or USBIn source not detected, wait 200 ms WaitforTimeout Completed ChargerExProtocol::EFI_ChargerExGetChargerPresence DCIn or USBIn source not detected, wait 200 ms WaitforTimeout Completed ChargerExProtocol::EFI_ChargerExGetChargerPresence DCIn or USBIn source not detected, wait 200 ms WaitforTimeout Completed ChargerExProtocol::EFI_ChargerExGetChargerPresence DCIn or USBIn source not detected, wait 200 ms WaitforTimeout Completed ChargerExProtocol::EFI_ChargerExGetChargerPresence DCIn or USBIn source not detected, wait 200 ms WaitforTimeout Completed ChargerExProtocol::EFI_ChargerExGetChargerPresence DCIn or USBIn source not detected, wait 200 ms WaitforTimeout Completed ChargerExProtocol::EFI_ChargerExGetChargerPresence DCIn or USBIn source not detected, wait 200 ms WaitforTimeout Completed ChargerExProtocol::EFI_ChargerExGetChargerPresence DCIn or USBIn source not detected, wait 200 ms WaitforTimeout Completed ChargerExProtocol::EFI_ChargerExGetChargerPresence DCIn or USBIn source not detected, wait 200 ms WaitforTimeout Completed ChargerExProtocol::EFI_ChargerExGetChargerPresence DCIn or USBIn source not detected, wait 200 ms WaitforTimeout Completed ChargerExProtocol::EFI_ChargerExGetChargerPresence DCIn or USBIn source not detected, wait 200 ms WaitforTimeout Completed ChargerExProtocol::EFI_ChargerExGetChargerPresence DCIn or USBIn source not detected, wait 200 ms WaitforTimeout Completed ChargerExProtocol::EFI_ChargerExGetChargerPresence DCIn or USBIn source not detected, wait 200 ms WaitforTimeout Completed ChargerExProtocol::EFI_ChargerExGetChargerPresence DCIn or USBIn source not detected, wait 200 ms WaitforTimeout Completed ChargerExProtocol::EFI_ChargerExGetChargerPresence DCIn or USBIn source not detected, wait 200 ms WaitforTimeout Completed ChargerExProtocol::EFI_ChargerExGetChargerPresence DCIn or USBIn source not detected, wait 200 ms WaitforTimeout Completed ChargerExProtocol::EFI_ChargerExGetChargerPresence DCIn or USBIn source not detected, wait 200 ms WaitforTimeout Completed 147, ChargerLib:: ChargerLibTarget_GetBatteryStatus use PmicFgProtocol 147, ChargerLib:: ChargerLibTarget_GetBatteryID batt_id_from_sdam = 101000 147, ChargerLib:: ChargerLibTarget_GetBatteryID BATT_ID_2 = 101000 147, ChargerLib:: ChargerLibTarget_GetBatteryType Battery type = 0 147, QcomChargerDxe:: EFI_QcomChargerGetChargerConfig CfgKey = 0 Value = 3300 Bulk in XFR aborted Error Rx, should not happen! Check your USB connection [ 148011] C - ResetFastboot UsbfnDwcTransfer: Ep 1, EpDir 0: USB cable not attached, cannot transfer data UsbDeviceSend: Failed to submit data transfer: Not Ready Auto shutdown without USB connected triggered! [ 148961] read factory kill timeout: 1 [ 148962] deleted factory kill timeout utag backlight_control: DisplayBacklightBrightnessLevelControl 3 returned error = Unsupported MDPLib: Halt vbif axi failed! log: before ShutdownDevice,turn off display and backlight CallBack: 0xBC54ADB0 [149183] MotoBootModule.dll WARN: ExecTime: 222 ms DSIDriver: Packet Timeout, Resending DSI Packet. DisplayDxe: DSIDriver_Write: DSI_Display_ClientWrite failed! DSI Status: 0xD Backlight brightness DCS command send failed MDPPlatformConfig: Backlight level control failed backlight_control: DisplayBacklightBrightnessLevelControl 0 returned error = Device Error backlight_control: DisplayBacklightBrightnessLevelControl 3 returned error = Unsupported fastboot exit code 83 pmic_glink_Link_State_NotifCb:: GLINK_LINK_STATE_UP remote ss = soccp transport name = SMEM pmic_glink_Init:: glink is up, retry count = 0. pmic_glink_state_change:: got state_change event = 0 pmic_glink_state_change:: IsPMICChannelOpen = 1 pmic_glink_state_change:: queue Rx Intent success. status = Success pmic_glink_state_change:: queue Rx Intent success. status = Success pmic_glink_state_change:: queue Rx Intent success. status = Success pmic_glink_state_change:: queue Rx Intent success. status = Success pmic_glink_state_change:: queue Rx Intent success. status = Success pmic_glink_state_change:: queue Rx Intent success. status = Success pmic_glink_open:: success, retry count = 0. pmic_glink_tx:: glink tx failed status = Compromised Data.ret = -13 pmic_glink_state_change:: got state_change event = 1 pmic_glink_state_change:: glink channel local disconnected. INFO: Received ResetSytem request. INFO: Type :0x2 INFO: DataSize :0x0 Start EBS [149375] Exit USB monitor timer DisplayDxe: execution time(897119us) total time(148331667us) Logger: last time saving dirty log