Format: Log Type - Time(microsec) - Message - Optional Info Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic S - QC_IMAGE_VERSION_STRING=BOOT.MXF.2.5.3-00337.1-KAANAPALI-1.161181.8 S - IMAGE_VARIANT_STRING=SocMolokaiLAA S - OEM_IMAGE_VERSION_STRING=ip-10-195-203-107 S - Boot Interface: UFS S - Secure Boot: Off S - Boot Config @ 0x221c8600 = 0x00000001 S - JTAG ID @ 0x221c8744 = 0x002fd0e1 S - OEM ID @ 0x221c8700 = 0x000002e8 S - Serial Number @ 0x221c8610 = 0x0000047b11a45995 S - OEM Config Row 0 @ 0x221c2158 = 0x0000000000000000 S - OEM Config Row 1 @ 0x221c2160 = 0x000002e800000000 S - Feature Config Row 0 @ 0x221c2188 = 0x0000000000000000 S - Feature Config Row 1 @ 0x221c2190 = 0x7000000000000000 S - OEM LCS:PROD S - Core 0 Frequency, 2016 MHz S - PBL Patch Ver: 3 S - PBL freq: 600 MHZ S - Cluster: 0, Core: 0 S - -------------------------------------------------- PBL Timestamps (in usecs)(,version/bytes) -------------------------------------------------- CPBL Start: 155 CPBL HW INIT Start: 473 CPBL HW INIT End: 3621 CPBL APPS Reset Start: 3668 CPBL APPS Sec Packet Init Start: 3795 CPBL APPS Sec Packet Init End: 3803 CPBL APPS Init Start: 3818 CPBL APPS Cache Init Start: 4140 CPBL APPS Cache Init End: 4175 CPBL APPS Core PWRUP Start: 4231 CPBL APPS Core PWRUP End: 4285 CPBL APPS Init End: 4300 CPBL APPS Reset End: 4311 APBL start: 4328,16777474 CPBL Exit: 4370 APBL Cold Boot start4635 APBL Boot Media Detect Start: 9283 APBL flash init stage 1 complete: 11813 APBL flash init stage 2 complete: 36423 APBL flash init stage 3 complete: 49410 APBL Boot Media Detect End: 59603 APBL SHELF Load+Auth Start: 59605 APBL ELF MD Load Start: 62476 APBL ELF MD Load End: 62985 APBL ELF Seg Load Start: 62986 APBL ELF Seg Load End: 64808,19184 APBL SEQ Valid Set: 64830 APBL SEQ SA ACK Rcvd: 66935 APBL ELF MD Load Start: 68580 APBL ELF MD Load End: 70238 APBL ELF Auth Start: 70245 APBL ELF Auth End: 76761 APBL ELF Seg Load Start: 76763 APBL ELF Seg Load End: 78665,43760 APBL ELF Seg Verify Start: 78666 APBL ELF Seg Verify End: 79943 APBL ELF MD Load Start: 81218 APBL ELF MD Load End: 82951 APBL ELF Auth Start: 82955 APBL ELF Auth End: 89426 APBL ELF Seg Load Start: 89428 APBL ELF Seg Load End: 96248,207936 APBL ELF Seg Verify Start: 96250 APBL ELF Seg Verify End: 99806 APBL ELF MD Load Start: 101081 APBL ELF MD Load End: 102768 APBL ELF Auth Start: 102770 APBL ELF Auth End: 109266 APBL ELF Seg Load Start: 109268 APBL ELF Seg Load End: 119978,1162208 APBL ELF Seg Verify Start: 119980 APBL ELF Seg Verify End: 122746 APBL SHELF Load+Auth End: 122820 APBL TME PBL Exit: 122821 APBL XBL_SC Exit Check: 123226 APBL XBL_SC Exit Ack: 154163 APBL Exit: 154166 B - 154757 - SBL1, Start B - 189344 - SBL1 BUILD @ 07:03:31 on May 27 2026 B - 189527 - usb: usb_eud_serial , 0x11a45995 D - 274 - sbl1_hw_init D - 1464 - media_init:1 B - 191265 - XBL_AC_CFG - Image Load, Start D - 9882 - Auth Metadata D - 32086 - XBL_AC_CFG - Image Loaded, Delta - (39680 Bytes) B - 223351 - APDP - Image Load, Start D - 214 - APDP - Image Loaded, Delta - (64 Bytes) D - 0 - boot_dload_dump_security_regions D - 0 - EUD Init D - 0 - blacklist enable D - 4178 - DP_Milestone D - 2959 - Auth Metadata D - 5490 - sbl1_xblconfig_init B - 233233 - XBL Config - Image Load, Start D - 2928 - boot_pre_ddr_dtb_load D - 2837 - tsens_init_if D - 335 - boot_check_device_temp B - 260866 - PM: PM_DT_PARSING_ERR: charger B - 261293 - BUS: 0, PMIC A:2.1 B:2.1 D:2.0 F:2.0 G:2.0 H:2.1 I:2.0 K:2.0 B - 261293 - BUS: 1, PMIC B - 263855 - PM: OEM_PSI pre-device-opsi Start B - 264770 - PM: OEM_PSI pre-device-opsi Done B - 265746 - PM: Reset by PSHOLD B - 265746 - PM: Reset Type: Shutdown B - 265777 - PM: PON by PWR key DEB B - 302956 - PM: SET_VAL:Skip B - 303231 - PM: PSI: b0x10_v0x16 OTP: v0x10 B - 305732 - PM: OEM_PSI post-device-opsi Start B - 306616 - PM: OEM_PSI post-device-opsi Done B - 306677 - PM: Device Init # SPMI Transn: 3742 err=0x0 D - 67344 - pm_device_init, Delta B - 306677 - pm_driver_init, Start B - 318755 - PM: Driver Init # SPMI Transn: 965 D - 12078 - pm_driver_init, Delta D - 79422 - sbl1_pmic_init D - 0 - EUD Post PMIC Init D - 35105 - media_init:2 B - 413092 - UFS Spec Version: 4.10 B - 417392 - UFS INQUIRY ID: XBSTOR XBUSC1B59AATH2 0304 B - 419558 - UFS Boot LUN: 1 B - 422791 - UFS Total Size: 256 GB B - 440206 - UFS Speed: Gear 5 Lane 2 Rate B D - 90982 - media_init:3 D - 427 - boot_wdog_disable_check B - 445879 - LOG_START-0000000063 D - 1403 - init-logstomedia D - 0 - shrm_load_cancel B - 447282 - SHRM - Image Load, Start D - 9851 - Auth Metadata D - 15006 - SHRM - Image Loaded, Delta - (176218 Bytes) B - 462654 - CDT not found in any storage media, using defaults D - 366 - boot_cdt_init B - 463234 - CDT - Image Load, Start B - 463508 - CDT not found in any storage media D - 9577 - sbl1_hw_platform_pre_ddr B - 473695 - usb: ldr , 0x2e2 B - 474000 - usb: qusb_dci_eud_init B - 474275 - PM: Get RID from SDAM: 101000 B - 474610 - PM: Battery ID: 101000 Ohm B - 479582 - PM: VBAT: 4298mV IBAT: 283mA T: 27C B - 479917 - PM: CHG Init # SPMI Transn: 230 err=0x0 B - 480222 - vsense_init, Start D - 0 - vsense_init, Delta B - 480802 - CPR- Global: rev 1,vpid 1 Local: rev 1,vpid 1 D - 18544 - sbl1_hw_pre_ddr_init B - 493002 - V-/V+/P:001 B - 493307 - V-/V+/P:001 D - 1067 - boot_fedl_check D - 0 - boot_dload_handle_forced_dload_timeout D - 762 - sbl1_load_ddr_training_data B - 495228 - Pre_DDR_clock_init, Start D - 0 - Pre_DDR_clock_init, Delta D - 1769 - sbl1_ddr_set_params B - 496204 - sbl1_ddr_init, Start B - 496692 - DDR: LLCC Qultivate Vector = 0 B - 501481 - DDR_INIT with shrm.elf B - 501755 - INFO: PXI based read & write training enabled B - 518927 - eCDT MRR - Data Starting Address: 0x3104E500 B - 525576 - Returning from DDR_FW_Init B - 525881 - ddr_init = 1 cold boot D - 29677 - sbl1_ddr_init, Delta B - 526491 - DSF version = 007.00.00 B - 526796 - Manufacturer ID = 0x8f, Device Type = 0x8 B - 527070 - Rank 0 size = 6144 MB, Rank 1 size = 6144 MB D - 31720 - sbl1_ddr_init D - 30 - store-logstomedia B - 528931 - do_ddr_training, Start B - 587308 - DDR: Start of DDR Training Restore B - 593865 - Returning from DDR_FW_Restore B - 594170 - DDR: End of DDR Training Restore D - 65270 - do_ddr_training, Delta B - 595390 - SecLib initiate DARE sequence start B - 598135 - Enable default ARM features B - 598410 - MPAM_EN:1 MTE_EN:0 SME_EN:1 SVE_EN:1 B - 599447 - SecLib initiate DARE sequence successful B - 612043 - Returning from DDR_FW_Exit B - 612806 - DDR:set boot freq from device tree B - 613080 - Current DDR Freq = 2096 MHz B - 613355 - Max enabled DDR Freq = 4780 MHz D - 85156 - xbl_trng_ddi_seq D - 0 - store-logstomedia D - 0 - XBL DDR QB milestone call D - 1373 - xbl_map_smem D - 0 - boot_smem_debug_init D - 5734 - sbl1_smmu_init D - 8601 - boot_smem_init D - 305 - boot_ddr_share_data_to_aop D - 122 - boot_populate_ddr_details_shared_table D - 30 - boot_recovery_partitions_info_smem_init B - 632783 - MIPC & DARE DISABLED D - 305 - boot_update_ram_partition_table B - 633363 - Pimem init cmd, entry B - 636718 - (50000e) D - 3355 - Pimem init cmd, exit B - 650717 - External heap init, Start B - 651327 - External heap init, End D - 28334 - sbl1_post_ddr_init D - 0 - sbl1_hw_init_secondary B - 662307 - DDR - Image Load, Start D - 3690 - boot_post_ddr_dtb_load D - 0 - imageinfo_init D - 0 - boot_fmf_license_load_and_verify B - 667462 - HYP_AC_CFG - Image Load, Start D - 9974 - Auth Metadata D - 13054 - HYP_AC_CFG - Image Loaded, Delta - (72448 Bytes) B - 680882 - usb: UFS Serial - 568785f8 D - 458 - boot_usb_update_serial D - 0 - boot_usb_handle_charger D - 275 - sbl1_hw_platform_smem D - 0 - ramdump_load_cancel B - 682681 - RamDump - Image Load, Start D - 275 - RamDump - Image Loaded, Delta - (0 Bytes) B - 683261 - QUPFW - Image Load, Start D - 10126 - Auth Metadata D - 26321 - QUPFW - Image Loaded, Delta - (51707 Bytes) B - 756430 - DCP_DTB - Image Load, Start D - 2989 - Auth Metadata D - 11956 - DCP_DTB - Image Loaded, Delta - (23845 Bytes) B - 768661 - DCP - Image Load, Start D - 3080 - Auth Metadata D - 21106 - DCP - Image Loaded, Delta - (707801 Bytes) D - 0 - boot_update_abnormal_reset_status D - 0 - boot_cache_set_memory_barrier D - 30 - boot_smem_alloc_for_minidump D - 0 - boot_shrm_mini_dump_init D - 61 - boot_minidump_register_regions D - 183 - boot_smem_store_pon_status D - 0 - boot_clock_init_rpm D - 0 - boot_vsense_copy_to_smem D - 335 - sbl1_tlmm_init D - 0 - sbl1_efs_handle_cookies B - 794372 - PM: Orne attach B - 820907 - PM: PM Total Mem Allocated: 11498 D - 27755 - sbl1_pm_aop_pre_init_wrapper B - 822402 - AOP Config - Image Load, Start D - 2989 - Auth Metadata D - 11498 - AOP Config - Image Loaded, Delta - (18391 Bytes) B - 834175 - AOP - Image Load, Start D - 10065 - Auth Metadata D - 36661 - AOP - Image Loaded, Delta - (340958 Bytes) B - 871110 - TZ_AC_CFG - Image Load, Start D - 9974 - Auth Metadata D - 13176 - TZ_AC_CFG - Image Loaded, Delta - (56064 Bytes) B - 884591 - SOCCP_DTB - Image Load, Start D - 3050 - Auth Metadata D - 11773 - SOCCP_DTB - Image Loaded, Delta - (87896 Bytes) B - 896669 - SOCCP - Image Load, Start D - 3081 - Auth Metadata D - 47733 - SOCCP - Image Loaded, Delta - (2479357 Bytes) B - 945042 - SOCCP_DEBUG - Image Load, Start D - 10035 - Auth Metadata D - 30653 - SOCCP_DEBUG - Image Loaded, Delta - (43198 Bytes) D - 0 - dump dependency ready B - 976518 - SOCCP_DCD - Image Load, Start D - 3019 - Auth Metadata D - 5673 - SOCCP_DCD - Image Loaded, Delta - (12612 Bytes) B - 982496 - PDP_CDB - Image Load, Start D - 2989 - Auth Metadata D - 5643 - PDP_CDB - Image Loaded, Delta - (4729 Bytes) B - 988444 - PDP - Image Load, Start D - 10157 - Auth Metadata D - 24827 - PDP - Image Loaded, Delta - (349980 Bytes) D - 0 - boot_prepare_cpucp B - 1013759 - CPUCP_DTB - Image Load, Start D - 3111 - Auth Metadata D - 5978 - CPUCP_DTB - Image Loaded, Delta - (8792 Bytes) B - 1019981 - CPUCPFW - Image Load, Start D - 10187 - Auth Metadata D - 23332 - CPUCPFW - Image Loaded, Delta - (442300 Bytes) B - 1043618 - PGS-44729: CPBL patch detected D - 244 - boot_reset_cpucp B - 1044137 - TZ_QTI_Config - Image Load, Start D - 9974 - Auth Metadata D - 13786 - TZ_QTI_Config - Image Loaded, Delta - (117504 Bytes) B - 1058167 - QSEE Dev Config - Image Load, Start D - 3141 - Auth Metadata D - 7534 - QSEE Dev Config - Image Loaded, Delta - (53160 Bytes) B - 1065914 - QSEE - Image Load, Start D - 10858 - Auth Metadata D - 78171 - QSEE - Image Loaded, Delta - (4157936 Bytes) D - 1373 - sbl1_hw_play_vibr D - 122 - sbl1_smmuv2_fault_scan B - 1146312 - SEC - Image Load, Start D - 335 - SEC - Image Loaded, Delta - (64 Bytes) B - 1146891 - QHEE - Image Load, Start D - 10156 - Auth Metadata D - 26688 - QHEE - Image Loaded, Delta - (1510336 Bytes) B - 1173884 - APPSBL - Image Load, Start D - 3080 - Auth Metadata D - 40626 - APPSBL - Image Loaded, Delta - (5246840 Bytes) B - 1215394 - SBL1, End D - 1061156 - SBL1, Delta S - Flash Throughput, 237176 KB/s (16365202 Bytes, 69572 us) S - DDR Frequency, 2092 MHz UEFI Start [ 1403] - 0x0C4C01000 [ 1416] Sec.efi ASLR : ON DEP : ON (RTB) Timer Delta : +0 mS RAM Entry 0 : Base 0x0080000000 Size 0x0001240000 RAM Entry 1 : Base 0x0081300000 Size 0x0000100000 RAM Entry 2 : Base 0x0081960000 Size 0x0000C40000 RAM Entry 3 : Base 0x00D6E00000 Size 0x0001229000 RAM Entry 4 : Base 0x00D8800000 Size 0x0000000000 RAM Entry 5 : Base 0x00E02B0000 Size 0x001FD50000 RAM Entry 6 : Base 0x0880000000 Size 0x002F8FE000 RAM Entry 7 : Base 0x08B0000000 Size 0x0009900000 RAM Entry 8 : Base 0x0980000000 Size 0x0180000000 RAM Entry 9 : Base 0x08C0000000 Size 0x00C0000000 RAM Entry 10 : Base 0x08B9B00000 Size 0x0001E00000 RAM Entry 11 : Base 0x0082600000 Size 0x0053DD0000 RAM Available : 12060 MB (0x02F1CC7000) RAM Installed : 12288 MB (0x0300000000) Using DT Legeacy Lib start creat dtb hash table..blob address[81A04000] end create dtb hash table..creat hash table cost time:[19016]..total node:[1062] DTB config : client[0]..trace[0]..verbose[0] Minidump : ON WARN: Functional cores hardcoded for target Multithread : ON (Lib ver 1.3) CPU Cores : 8 (init 2) Init 1 aux cores of 7 Init CPU core 1 Continue booting UEFI on Core 0 > Scheduler up on Core 1 CONF File : uefiplatLA.cfg UEFI Ver : 6.0.260822.BOOT.MXF.2.5.3-00337.1-KAANAPALI-1 Build Info : 64b Aug 22 2026 15:09:55 Boot Device : UFS PROD Mode : TRUE Retail : TRUE [ 1910] DxeCore.efi Loading DxeCore at 0x00C1ECD000 EntryPoint=0x00C1ECE000 [ 1912] EnvDxeEnhanced.efi [ 1913] RscRtDxe.efi [ 1913] SCHandlerRtDxe.efi [ 1913] TimestampDxe.efi [ 1913] RuntimeDxe.efi [ 1913] QcomWDogDxe.efi HW Wdog Setting from PCD : Enabled HW Wdog Enabled [ 1913] ArmCpuDxe.efi [ 1914] ArmGicDxe.efi [ 1914] MetronomeDxe.efi [ 1914] ArmTimerDxe.efi [ 1914] MotBootFlagsDxe.efi [ 1914] OfflineCrashDumpDxe.efi [ 1914] MotBuildConfigDxe.efi [ 1915] SmemDxe.efi [ 1915] DALSys.efi [ 1915] HWIODxeDriver.efi [ 1915] ChipInfo.efi [ 1916] PlatformInfoDxeDriver.efi [ 1916] HALIOMMU.efi [ 1918] ULogDxe.efi [ 1918] CmdDbDxe.efi [ 1918] PwrUtilsDxe.efi [ 1919] NpaDxe.efi [ 1919] RpmhDxe.efi [ 1919] MailboxDxe.efi mbox_os_init: Failed to locate SCM protocol for Mailbox 14 **** [ 1920] QcomScmiDxe.efi [ 1920] CalibrationDxe.efi SLT Platform Key not found: 14 SCMI error: ProtocolId = 0x80, MessageId = 0x13, error = -1 Warning: calibration complete notification to PDP0 failed SCMI error: ProtocolId = 0x80, MessageId = 0x13, error = -1 Warning: calibration complete notification to PDP1 failed [ 1958] VcsDxe.efi [ 1959] ClockDxe.efi [ 1969] ICBDxe.efi [ 1969] ShmBridgeDxeLA.efi [ 1969] ScmDxeCompat.efi IsArmV8Smc() return TRUE [ 1972] DALTLMM.efi [ 1972] Qup.efi Lockinit failed Bad Buffer Size [ 1972] I2C.efi [ 1972] SPMI.efi [ 2001] ResetRuntimeDxe.efi [ 2002] PmicDxe.efi BUS_ID 0: PM0: 74, PM1: 73, PM3: 70, PM5: 70, PM6: 70, PM7: 86, PM8: 70, PM10: 72, BUS_ID 1: PM: PM_DT_PARSING_ERR: charger PM: Get RID from SDAM: 101000 PM: Battery ID: 101000 Ohm PM: Loader dbc skipped. VBAT: 4300mV =============== PM0 PON REASONS =============== ON_REASON: "PON_SEQ" OFF_REASON: PON_REASON1: "KPDPWR" POFF_REASON1: "PS_HOLD" WARM_RESET_REASON1: "KPDPWR" INFO: Detect power-key is pressed =============== SPARE REGISTERS =============== DVDD_0: 0x00: DVDD_1: 0x00 XVDD_0: 0x00: SOFT_0: 0x46: [ 2038] DiskIoDxe.efi [ 2038] PartitionDxe.efi [ 2038] EnglishDxe.efi [ 2038] FvSimpleFileSystem.efi [ 2038] UFSDxe.efi Primordial_getRegionInfo..... addr 0xC1BD1000 len 0x23000 perm 0x20000006..... Primordial_getRegionInfo..... addr 0xC1B8F000 len 0x41000 perm 0x20000006..... [ 2092] Fat.efi [ 2092] TzDxeLA.efi [ 2094] VariableDxe.efi Embedded Commonlibs loaded LoadSecureApps: Load app from partition(keymaster): Status = 0x0, AppId = 4294901761 variable policy engine disabled [ 2215] ProvDxe.efi LoadImageFromPartition(Prov) calling seccussfully, return: Success [ 2223] MotStorageDxe.efi [ 2224] MotUtagsDxe.efi [ 2224] MotUtagsDictDxe.efi [ 2224] MotHwIdDxe.efi [ 2224] HWID GPIOs (105, 107, 0) [ 2224] motorola_id_init, Start [ 2286] product ID = J, hardware ID = E [ 2293] WatchdogTimer.efi [ 2293] SecurityStubDxe.efi [ 2294] EmbeddedMonotonicCounter.efi [ 2294] RealTimeClock.efi InitializeRealTimeClock: using default timezone/daylight settings [ 2295] DevicePathDxe.efi [ 2295] CapsuleRuntimeDxe.efi [ 2296] HiiDatabase.efi [ 2296] FontDxe.efi [ 2298] QcomBds.efi Mounted FAT Volume: logfs Logger: saving log file CurBoot.txt PMIC RTC TimeInSeconds 301513 Time offset 0 [ 2311] get_mbm_fdt: Found best fdt @ 0x1959 Logger: suspicious log piece, StartPos 0x81CE4000 EndPos 0x81CE85B0 Logger: saving log file Log62.txt, cycle 62, BootCycleSuccess 60 Logger: suspicious huge Log piece size 0x45B0 [ 2318] SPI.efi [ 2319] HSUART.efi [ 2319] GpiDxe.efi [ 2322] VerifiedBootDxe.efi Smc Invoke call failed ret 0xB QCOM_Hibernate_CacheData: IClientEnv_open - Fail, nReturn = 11 [ 2322] RscDxe.efi [ 2325] IPCCDxe.efi [ 2326] FMFDxe.efi Smc Invoke call failed ret 0x10 Device SKU-ing failed - feature is disabled! If this feature is required, please enable "OEM_SKU_ready" via devcfg. RemoteObj_invoke count 1 FMF DeferredSKU failed - 7 [ 2329] SdccDxe.efi [ 2340] DDRInfoDxe.efi [ 2341] MotCoreServicesDxe.efi [ 2341] AbDxe.efi Multi Slot boot is supported [ 2342] UfsFfuDxe.efi UFS FFU: UfsFfuDxeInitialize, Version: 1.0.0 [ 2343] FeatureEnablerDxe.efi Smc Invoke call failed ret 0x17 QseeResponse->result = 0xE Status = 0x7 Smc Invoke call failed ret 0x17 QseeResponse->result = 0xE Status = 0x7 Smc Invoke call failed ret 0x17 QseeResponse->result = 0xE Status = 0x7 Smc Invoke call failed ret 0x17 QseeResponse->result = 0xE Status = 0x7 LoadImageFromPartitionUsingGuid Failed: 14 Failed to start featenabler_a TA, status = 14 [ 2345] DisplayDxe.efi [ 2346] get_mbm_fdt: Found best fdt @ 0x1959 Unable to get DisplayPanelDetectionResult, Not Found Unable to get primary Panel Detection Status success to locate pmic pwron protocol: Success long_key_check_in_advence is set PM: Boot up PwrKey press -2454 ms detected is more than expected 1950 ms duration. start up device. Release_time 42204838, Press_time 42207292 DisplayDxe: sPlatformParams.DualDisplay = 0 DisplayDxe: Panel0 index get from dts (Index: 0) DisplayDxe: Panel0 index get from dts (Index: 0)--(boe_ili97701A_682_1440x3168_dsc_cmd_v1) MotDynamicDSIPanelDetection readback = 0x2 0x5 0x1 0x92 Skipping reading Reg: 0xA1 for Panel ID 1 as already readed MotDynamicDSIPanelDetection readback = 0x2 0x5 0x1 0x92 MotDynamicDSIPanelDetection readback_ver = 0x3 0x0 0x0 0x0 Detected panel name boe_ili97701A_682_1440x3168_dsc_cmd_bd_v1 & version:000365D2 Panel 0 auto detection status: 2 DisplayDxe: Resolution 1440x3168 (PhysConnect 9) DisplayDxe_SetMode set resolution 1440x3168 for display 0 DisplayDxe_SetMode MDPSetMode fboffset=FC800000 wh=1440:3168 for display 0 [ 2454] BootTimeDxe.efi Boottime: Enter BootTimeDxeInitialize [ 2455] PILProxyDxe.efi [ 2455] PILDxe.efi [ 2461] SPSSDxe.efi SPSSLib:: SPSSLib_CreatePMICClients vreg_sp npa client creation failed! SPSSLib:: SPSSLib_LoadSPSS Creating PMIC clients failed: 0xE [ 2463] GlinkDxe.efi [ 2464] PrintDxe.efi [ 2464] PmicGlinkDxe.efi [ 2465] UsbPwrCtrlDxe.efi UsbPwrCtrlLibPmSchg_GetChgPmicInfo::UsbPwrCtrlLibPmSchg_GetChgPmicInfo PortNums = 1 [ 2465] QcomChargerDxeLA.efi 2, ChargerLib:: ChargerLib_InitFileLog 2, ChargerLib:: ChargerLibTarget_HWInit PlatformType = 8 has Static PlatHWConfig = 1 2, ChargerLib:: ChargerLibTarget_HWInit PlatformType = 8: ChargerHW = 1, GaugeHW = 1 2, QcomChargerDxe:: ChargerPlatform_Init Successfully initialized ChargerLibCommon Success [ 2470] ChargerExDxe.efi [ 2471] UsbfnDwc3Dxe.efi [ 2482] XhciPciEmulation.efi [ 2482] XhciDxe.efi [ 2483] UsbBusDxe.efi [ 2483] UsbKbDxe.efi [ 2484] UsbMassStorageDxe.efi [ 2484] UsbDeviceDxe.efi [ 2485] UsbConfigDxe.efi UsbConfigInit: USB platform 8, ver 65536, sub 0 qcom repeater found : 0x0 usb_redriver_init, Disable: 0x0 2, ChargerLib:: ChargerLibTarget_GetBatteryID batt_id_from_sdam = 101000 2, ChargerLib:: ChargerLibTarget_GetBatteryID BATT_ID_2 = 101000 2, ChargerLib:: ChargerLib_GetBatteryID BATT_ID_2 = 101000 2, ChargerLib:: ChargerLib_GetBatteryType Battery type = 0 2, ChargerLib:: ChargerLibTarget_IsChargingSupported PlatformType = 8: ChargerHW = 1, GaugeHW = 1 2, ChargerLib:: ChargerLibTarget_IsChargingSupported Support Charging = 1 2, ChargerLib:: ChargerLib_IsChargingSupported Support Charging = 1 ChargerExProtocol:: EFI_ChargerExGetChargerPresence HARD_RESET = 0 .KPDPWR = 1 PON1 = 0 USB_CHG = 0 DC_CHG 0 CBLPWR = 0 UsbConfigInit: UsbPwrCtrl No. of Ports = 1 Reset notification not located, Status:Not Found LocateProtocol failed, calling CreateEvent and RegisterProtocolNotify Status:Protocol Error [ 2487] ButtonsDxe.efi ButtonsDxeTest: Keypress SDAM data payload 1 [ 2488] TsensDxe.efi [ 2489] CPRDxe.efi [ 2498] UCDxe.efi [ 2511] RngDxe.efi [ 2511] SimpleTextInOutSerial.efi [ 2512] ConPlatformDxe.efi [ 2512] ConSplitterDxe.efi [ 2513] GraphicsConsoleDxe.efi [ 2514] ASN1X509Dxe.efi [ 2514] SecRSADxe.efi [ 2515] MbmModeDxe.efi [ 2515] get_mbm_fdt: Found best fdt @ 0x1959 EXT4 features: 0x2C, 0x42, 0x7B root inode: i_flags 0x80000 [ 2517] MotSolDxe.efi EnvDxe SplashScreenRenderCallbacknMmiRenderSplashScreen: logo=0 Primary display resolution: 1440 x 3168 DAP version: 10,2 (flags: 0x1) DAP sector size: 0x200 Blkdev: [0] super, sz 0x54D800000, start sec 0x800 Groups: [0] default, sz 0x0 [1] qti_dynamic_partitions_a, sz 0x4FFC00000 free sz: 0x1C8BB5000 [2] qti_dynamic_partitions_b, sz 0x4FFC00000 free sz: 0x1C8BB5000 Partitions: [0] cust_model_a, a=0x1, i=0, n=1, g=1, sz 0xF2C43000 [1] cust_model_b, a=0x1, i=1, n=0, g=2, sz 0x0 [2] odm_a, a=0x1, i=1, n=1, g=1, sz 0x1150D000 [3] odm_b, a=0x1, i=2, n=0, g=2, sz 0x0 [4] preload_a, a=0x1, i=2, n=1, g=1, sz 0x72BBD000 [5] preload_b, a=0x1, i=3, n=0, g=2, sz 0x0 [6] product_a, a=0x1, i=3, n=1, g=1, sz 0x39351000 [7] product_b, a=0x1, i=4, n=0, g=2, sz 0x0 [8] system_a, a=0x1, i=4, n=1, g=1, sz 0x11324C000 [9] system_b, a=0x1, i=5, n=0, g=2, sz 0x0 [10] system_dlkm_a, a=0x1, i=5, n=1, g=1, sz 0x84A000 [11] system_dlkm_b, a=0x1, i=6, n=0, g=2, sz 0x0 [12] system_ext_a, a=0x1, i=6, n=1, g=1, sz 0x19B6D000 [13] system_ext_b, a=0x1, i=7, n=0, g=2, sz 0x0 [14] vendor_a, a=0x1, i=7, n=1, g=1, sz 0x56C1B000 [15] vendor_b, a=0x1, i=8, n=0, g=2, sz 0x0 [16] vendor_dlkm_a, a=0x1, i=8, n=1, g=1, sz 0x2DCF000 [17] vendor_dlkm_b, a=0x1, i=9, n=0, g=2, sz 0x0 [ 2520] get_mbm_fdt: Found best fdt @ 0x1959 load_logo find [logo_boot], match_idx=0 load_logo name=[logo_boot], w:h=[1440:3168] DisplayUtils: Invalid inputs of horizontal / vertical resolution. RenderSplashScreen: primary render error code Invalid Parameter Primary displayId=0, logo size=13685814, flags=0 Secondary display resolution: 0 x 0 EnvDxe Render Callback [ 2529] BacklightDxe.efi PM: Boot up PwrKey press -2454 ms detected is more than expected 1950 ms duration. start up device. Release_time 42204838, Press_time 42207292 PM_DEVICE_1 GetBatteryStatus: Voltage = 4296 mV [ 2531] get_mbm_fdt: Found best fdt @ 0x1959 BacklightDxe PowerKey_powerup_Threshold = 3200 backlight_control: DisplayBacklightBrightnessLevelControl 3 returned error = Unsupported [ 2534] RmVmDxe.efi [ 2535] QRKSDxe.efi RemoteObj_invoke count 1 [ 2550] PsStateDxe.efi RemoteObj_invoke count 1 [ 2550] Smp2pDxe.efi [ 2551] UsbMsdDxe.efi [ 2552] UsbInitDxe.efi [ 2552] FvDxe.efi [ 2553] ParserDxe.efi BDS Entry [ 2553] WaitParallelThreads InIt [ 2554] MDPCheckFpsFuse: Panel refresh rate (0 fps) is beyond SW Fuse (0 fps)! EnvDxe SplashScreenRenderCallbacknMmiRenderSplashScreen: logo=0 Primary display resolution: 1440 x 3168 load_logo find [logo_boot], match_idx=0 load_logo name=[logo_boot], w:h=[1440:3168] Primary displayId=0, logo size=13685814, flags=0 Secondary display resolution: 0 x 0 EnvDxe Render Callback Reset notification not located, Status:Not Found Boot Cycle : 25 Run Cycle : 7 UEFI Ver : 6.0.260822.BOOT.MXF.2.5.3-00337.1-KAANAPALI-1 Platform : MTP Subtype : 0 Boot Device : UFS Chip Name : SM8845 Chip Ver : 1.0 Chip Num : 0x11A45995 Chip ECID : 0x047B11A45995 SKU ID : 0x2 P_Code : 0x1 UFS SERIAL : 0x568785F8 VB: Non-secure device: Security State: (0xFFF3F) SECURE BOOT : 0 PONReason : 128 DDR Manufature : 143 DDR Type : 8 DDR capacity (MB) : 12288 MB UFS capacity : 0x1DE1C000 TME_SEQ_PATCH_VERSION : 0x1 Boot Core : 1651 MHz ----------------------------- Hotkey detected while processing DT config so cannot enter Quantum APP. Start to launch default charger app. [ 2712] QcomChargerApp.efi QcomChargerApp:: QcomChargerApp_Entry 2, ChargerLib:: ChargerLibTarget_GetBatteryID batt_id_from_sdam = 101000 2, ChargerLib:: ChargerLibTarget_GetBatteryID BATT_ID_2 = 101000 2, ChargerLib:: ChargerLib_GetBatteryID BATT_ID_2 = 101000 2, ChargerLib:: ChargerLib_GetBatteryType Battery type = 0 2, ChargerLib:: ChargerLibTarget_IsChargingSupported PlatformType = 8: ChargerHW = 1, GaugeHW = 1 2, ChargerLib:: ChargerLibTarget_IsChargingSupported Support Charging = 1 2, ChargerLib:: ChargerLib_IsChargingSupported Support Charging = 1 2, ChargerLib:: ChargerLibTarget_GetDisplayImageType Display Image type = 0 2, ChargerLib:: ChargerLib_Exit ChargerLibExit 2, ChargerLib:: ChargerLibTarget_LedOn LED TURNED OFF = Success 2, ChargerLib:: ChargerLibTarget_LedOn LED TURNED OFF = Success pil-abl Done t=60ms s=2ms a=8ms f=48ms d=0ms UEFI Total : 1378 ms POST Time [ 2781] OS Loader Total FreeMem available : 10431 MB Max Contiguos FreeMem available : 9216 MB [ 2790] MotoBootModule.efi [ 2792] get_mbm_fdt: Found best fdt @ 0x1959 [ 2794] I - MBM version is MBM-3.0-eletre_cn-5414246790d-260822-WWX36.44-23-ea3321 [ 2794] I - Power up reason is: 0x00000080 ("power_key_press") LocateProtocol gQcomPmicPonProtocolGuid ok!: Success DEBUG getting warm reset status: 0 PON Reason is 0x97EE6B80 cold_boot:1 Applying system config Loading Image sysconfig Done : 1 ms, Image size : 4096 Bytes CHK_COUNT: @ 0xBD1D7600x +++ system_config: ->ramdump_mode = 0x1 +++ DUMP_HAPPEN [1] +++ +++ boot_imem->offline_dump_enable = 0x1 +++ boot_imem->offline_dump_happen= 0x0 detected buffer overflow in StrnCpyS, line 314 detected buffer overflow in StrnCpyS, line 314 GetRunningBLSlotSuffix: Bypassing GUID check for xbl_ac_config_a GetRunningBLSlotSuffix: Bypassing GUID check for tme_config_a GetRunningBLSlotSuffix: Bypassing GUID check for tme_fw_a GetRunningBLSlotSuffix: Bypassing GUID check for xbl_config_a GetRunningBLSlotSuffix: Bypassing GUID check for xbl_a Currently running bootloader is from BOOT LUN: 1, slot: _a/_a Total DDR Size: 0x00000002F1CC7000 Locate EFI_SOFTSKU_Protocol failed, Status = (0xE) SSM using extended UID prov: app ID -65533 detected buffer overflow in StrnCpyS, line 314 prov enabled = 1 VB: Non-secure device: Security State: (0xFFF3F) VB: RWDeviceState: Succeed using devinfo! [ 2818] I - SSM: SSM loaded CID=0 [ 2822] I - SOD: initializing... [ 2825] I - SOD: RAM dump feature is enabled [ 2825] I - SOD: RAM dump mode is both [ 2826] E - sod_flags_sponsor: failed to read utag [cmdl] [ 2826] I - read init reboot command failed target_enable_resin_and_kpdpwr_warm_reset: PON access is disabled by DTS! target_disable_resets: PON access is disabled by DTS! [ 2826] RAM: UNKNOWN, LP5, 0x300000000 Bytes [ 2826] C - next_valpair: value size mismatch [ 2899] E - sod_flags_sponsor: failed to read utag [cmdl] [ 2900] E - sod_flags_sponsor: failed to read utag [cmdl] [ 2900] E - sod_flags_sponsor: failed to read utag [cmdl] [ 2901] E - sod_flags_sponsor: failed to read utag [cmdl] [ 2901] E - sod_flags_sponsor: failed to read utag [cmdl] [ 2902] E - sod_flags_sponsor: failed to read utag [cmdl] [ 2903] E - sod_flags_sponsor: failed to read utag [cmdl] [ 2903] I - Entering normal Android mode [ 2903] C - Can't find UTAG show boot cycle! [ 2903] C - Can't find UTAG show boot cycle! VB: Non-secure device: Security State: (0xFFF3F) VB: RWDeviceState: Succeed using devinfo! [ 2905] I - SSM: verity error counter is cleared ChargerExProtocol:: EFI_ChargerExGetChargerPresence HARD_RESET = 0 .KPDPWR = 1 PON1 = 0 USB_CHG = 0 DC_CHG 0 CBLPWR = 0 UFS FFU: UfsFfuTrigger called UFS FFU: Device Info - Vendor: XBSTOR, Model: XBUSC1B59AATH2, Rev: 0304 UFS FFU: GetFwList returned 6 entries UFS FFU: Checking FW entry 0 - Vendor: SAMSUNG, Model: KLUEG4RHKF-F0H1, Version: 2000 UFS FFU: Checking FW entry 1 - Vendor: SAMSUNG, Model: KLUFG8RHKF-F0H1, Version: 2000 UFS FFU: Checking FW entry 2 - Vendor: SAMSUNG, Model: KLUGG8NHKB-F0H1, Version: 2000 UFS FFU: Checking FW entry 3 - Vendor: SKHYNIX, Model: HN8T171EJKX151, Version: A202 UFS FFU: Checking FW entry 4 - Vendor: XBSTOR, Model: XBUSC1B59AATH2, Version: 0304 UFS FFU: Checking FW entry 5 - Vendor: XBSTOR, Model: XBUSC1B5AAATH3, Version: 0304 UFS FFU: No matching FW found or already up-to-date Loading Image recovery_a Done : 2 ms, Image size : 4096 Bytes Loading Image init_boot_a Done : 0 ms, Image size : 4096 Bytes Loading Image pvmfw_a Done : 1 ms, Image size : 4096 Bytes Trying to boot from slot _a detected buffer overflow in StrnCpyS, line 314 _a ever booted successfully Mark the slot _a as Active Refreshing BlockIO Handles [ 3243] I - SOD: Partition table changed, invalidating [ 3243] I - SOD: updating config Sponsor with same callback already exists! [ 3244] E - SOD: Failed to install boot flag sponsor Booting Into Mission Mode Loading Image boot_a Done : 0 ms, Image size : 4096 Bytes avb_slot_verify.c:782: DEBUG: Loading vbmeta struct from partition 'vbmeta_a'. Load Image vbmeta_a total time: 1 ms avb_slot_verify.c:782: DEBUG: Loading vbmeta struct from partition 'vbmeta_system_a'. Load Image vbmeta_system_a total time: 0 ms avb_slot_verify.c:411: DEBUG: init_boot_a: Loading entire partition. Load Image init_boot_a total time: 3 ms [ 3255] I - SSM: HypX prematurely locked. avb_slot_verify.c:492: ERROR: init_boot_a: Hash of data does not match digest in descriptor. avb_slot_verify.c:411: DEBUG: pvmfw_a: Loading entire partition. Load Image pvmfw_a total time: 1 ms [ 3258] C - vbmeta_system_a image cached. [ 3258] C - SSM: prod: eletre, cid: 11 avb_slot_verify.c:411: DEBUG: boot_a: Loading entire partition. Load Image boot_a total time: 33 ms avb_slot_verify.c:411: DEBUG: dtbo_a: Loading entire partition. Load Image dtbo_a total time: 26 ms avb_slot_verify.c:411: DEBUG: vendor_boot_a: Loading entire partition. Load Image vendor_boot_a total time: 26 ms [ 3404] I - SSM: HypX prematurely locked. avb_slot_verify.c:492: ERROR: vendor_boot_a: Hash of data does not match digest in descriptor. [ 3404] C - vbmeta_a image cached. ReadPersistentValue 0xE avb_slot_verify.c:1390: DEBUG: No dm-verity corruption - using in 'restart' mode. State: Unlocked, AvbSlotVerify returned ERROR_VERIFICATION, continue boot Ftr OsVer:0x40000 SPL:0x9A7 Smc Invoke call failed ret 0x17 QseeResponse->result = 0xE Status = 0x7 KeyMaster: allow reprovision setKeyMasterSetRotAndBootState Set RoT success KeyMasterSetRotAndBootState Set Boot State success VB2: Authenticate complete! boot state is: orange VB: Non-secure device: Security State: (0xFFF3F) VB: RWDeviceState: Succeed using devinfo! VB: Non-secure device: Security State: (0xFFF3F) VB: RWDeviceState: Succeed using devinfo! Loaded Partition: init_boot Loaded Partition: pvmfw VB: Bcc Params populated VB2: boot state: orange(1)