Format: Log Type - Time(microsec) - Message - Optional Info Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic S - QC_IMAGE_VERSION_STRING=BOOT.MXF.2.5.3-00337.1-KAANAPALI-1.161181.8 S - IMAGE_VARIANT_STRING=SocMolokaiLAA S - OEM_IMAGE_VERSION_STRING=ip-10-195-203-107 S - Boot Interface: UFS S - Secure Boot: Off S - Boot Config @ 0x221c8600 = 0x00000001 S - JTAG ID @ 0x221c8744 = 0x002fd0e1 S - OEM ID @ 0x221c8700 = 0x000002e8 S - Serial Number @ 0x221c8610 = 0x0000047b11a45995 S - OEM Config Row 0 @ 0x221c2158 = 0x0000000000000000 S - OEM Config Row 1 @ 0x221c2160 = 0x000002e800000000 S - Feature Config Row 0 @ 0x221c2188 = 0x0000000000000000 S - Feature Config Row 1 @ 0x221c2190 = 0x7000000000000000 S - OEM LCS:PROD S - Core 0 Frequency, 2016 MHz S - PBL Patch Ver: 3 S - PBL freq: 600 MHZ S - Cluster: 0, Core: 0 S - -------------------------------------------------- PBL Timestamps (in usecs)(,version/bytes) -------------------------------------------------- CPBL Start: 155 CPBL HW INIT Start: 473 CPBL HW INIT End: 3620 CPBL APPS Reset Start: 3666 CPBL APPS Sec Packet Init Start: 3795 CPBL APPS Sec Packet Init End: 3801 CPBL APPS Init Start: 3818 CPBL APPS Cache Init Start: 4140 CPBL APPS Cache Init End: 4175 CPBL APPS Core PWRUP Start: 4231 CPBL APPS Core PWRUP End: 4285 CPBL APPS Init End: 4298 CPBL APPS Reset End: 4311 APBL start: 4326,16777474 CPBL Exit: 4370 APBL Cold Boot start4635 APBL Boot Media Detect Start: 9283 APBL flash init stage 1 complete: 11805 APBL flash init stage 2 complete: 36408 APBL flash init stage 3 complete: 49383 APBL Boot Media Detect End: 55576 APBL SHELF Load+Auth Start: 55578 APBL ELF MD Load Start: 58420 APBL ELF MD Load End: 58930 APBL ELF Seg Load Start: 58931 APBL ELF Seg Load End: 60753,19184 APBL SEQ Valid Set: 60771 APBL SEQ SA ACK Rcvd: 62876 APBL ELF MD Load Start: 64523 APBL ELF MD Load End: 66181 APBL ELF Auth Start: 66185 APBL ELF Auth End: 72710 APBL ELF Seg Load Start: 72711 APBL ELF Seg Load End: 74613,43760 APBL ELF Seg Verify Start: 74615 APBL ELF Seg Verify End: 75891 APBL ELF MD Load Start: 77166 APBL ELF MD Load End: 78901 APBL ELF Auth Start: 78905 APBL ELF Auth End: 85376 APBL ELF Seg Load Start: 85378 APBL ELF Seg Load End: 92206,207936 APBL ELF Seg Verify Start: 92208 APBL ELF Seg Verify End: 95765 APBL ELF MD Load Start: 97040 APBL ELF MD Load End: 98738 APBL ELF Auth Start: 98741 APBL ELF Auth End: 105241 APBL ELF Seg Load Start: 105243 APBL ELF Seg Load End: 115938,1162208 APBL ELF Seg Verify Start: 115940 APBL ELF Seg Verify End: 118705 APBL SHELF Load+Auth End: 118780 APBL TME PBL Exit: 118781 APBL XBL_SC Exit Check: 119181 APBL XBL_SC Exit Ack: 150106 APBL Exit: 150110 B - 150700 - SBL1, Start B - 185287 - SBL1 BUILD @ 07:03:31 on May 27 2026 B - 185470 - usb: usb_eud_serial , 0x11a45995 D - 275 - sbl1_hw_init D - 1464 - media_init:1 B - 187209 - XBL_AC_CFG - Image Load, Start D - 9760 - Auth Metadata D - 31964 - XBL_AC_CFG - Image Loaded, Delta - (39680 Bytes) B - 219173 - APDP - Image Load, Start D - 213 - APDP - Image Loaded, Delta - (64 Bytes) D - 0 - boot_dload_dump_security_regions D - 0 - EUD Init D - 0 - blacklist enable D - 4179 - DP_Milestone D - 2989 - Auth Metadata D - 5520 - sbl1_xblconfig_init B - 229085 - XBL Config - Image Load, Start D - 2928 - boot_pre_ddr_dtb_load D - 2837 - tsens_init_if D - 366 - boot_check_device_temp B - 256779 - PM: PM_DT_PARSING_ERR: charger B - 257206 - BUS: 0, PMIC A:2.1 B:2.1 D:2.0 F:2.0 G:2.0 H:2.1 I:2.0 K:2.0 B - 257206 - BUS: 1, PMIC B - 259768 - PM: OEM_PSI pre-device-opsi Start B - 260683 - PM: OEM_PSI pre-device-opsi Done B - 261659 - PM: Reset by PSHOLD B - 261659 - PM: Reset Type: Hard Reset B - 261659 - PM: PON by SYSOK B - 298869 - PM: SET_VAL:Skip B - 299174 - PM: PSI: b0x10_v0x16 OTP: v0x10 B - 302499 - PM: OEM_PSI post-device-opsi Start B - 303383 - PM: OEM_PSI post-device-opsi Done B - 303444 - PM: Device Init # SPMI Transn: 3761 err=0x0 D - 68228 - pm_device_init, Delta B - 303444 - pm_driver_init, Start B - 315522 - PM: Driver Init # SPMI Transn: 965 D - 12078 - pm_driver_init, Delta D - 80306 - sbl1_pmic_init D - 0 - EUD Post PMIC Init D - 34435 - media_init:2 B - 404369 - UFS Spec Version: 4.10 B - 408669 - UFS INQUIRY ID: XBSTOR XBUSC1B59AATH2 0304 B - 410865 - UFS Boot LUN: 1 B - 414098 - UFS Total Size: 256 GB B - 431514 - UFS Speed: Gear 5 Lane 2 Rate B D - 85918 - media_init:3 D - 427 - boot_wdog_disable_check B - 436882 - LOG_START-0000000004 D - 1403 - init-logstomedia D - 0 - shrm_load_cancel B - 438285 - SHRM - Image Load, Start D - 9852 - Auth Metadata D - 15006 - SHRM - Image Loaded, Delta - (176218 Bytes) B - 453657 - CDT not found in any storage media, using defaults D - 366 - boot_cdt_init B - 454236 - CDT - Image Load, Start B - 454511 - CDT not found in any storage media D - 9577 - sbl1_hw_platform_pre_ddr B - 464759 - usb: chgr - SDP_CHARGER B - 465033 - usb: qusb_dci_eud_init B - 465338 - PM: Get RID from SDAM: 101000 B - 465613 - PM: Battery ID: 101000 Ohm B - 470615 - PM: VBAT: 3870mV IBAT: 0mA T: 25C B - 470981 - PM: CHG Init # SPMI Transn: 231 err=0x0 B - 471255 - vsense_init, Start D - 0 - vsense_init, Delta B - 471865 - CPR- Global: rev 1,vpid 1 Local: rev 1,vpid 1 D - 18574 - sbl1_hw_pre_ddr_init D - 519 - boot_fedl_check D - 0 - boot_dload_handle_forced_dload_timeout D - 732 - sbl1_load_ddr_training_data B - 485346 - Pre_DDR_clock_init, Start D - 0 - Pre_DDR_clock_init, Delta D - 1738 - sbl1_ddr_set_params B - 486383 - sbl1_ddr_init, Start B - 486841 - DDR: LLCC Qultivate Vector = 0 B - 491629 - DDR_INIT with shrm.elf B - 491934 - INFO: PXI based read & write training enabled B - 509075 - eCDT MRR - Data Starting Address: 0x3104E500 B - 514779 - Returning from DDR_FW_Init B - 515084 - ddr_init = 1 cold boot D - 28731 - sbl1_ddr_init, Delta B - 515694 - DSF version = 007.00.00 B - 515968 - Manufacturer ID = 0x8f, Device Type = 0x8 B - 516273 - Rank 0 size = 6144 MB, Rank 1 size = 6144 MB D - 30744 - sbl1_ddr_init D - 0 - store-logstomedia B - 518134 - do_ddr_training, Start B - 576511 - DDR: Start of DDR Training Restore B - 583068 - Returning from DDR_FW_Restore B - 583373 - DDR: End of DDR Training Restore D - 65270 - do_ddr_training, Delta B - 584593 - SecLib initiate DARE sequence start B - 587308 - Enable default ARM features B - 587613 - MPAM_EN:1 MTE_EN:0 SME_EN:1 SVE_EN:1 B - 588619 - SecLib initiate DARE sequence successful B - 601246 - Returning from DDR_FW_Exit B - 602009 - DDR:set boot freq from device tree B - 602283 - Current DDR Freq = 2096 MHz B - 602588 - Max enabled DDR Freq = 4780 MHz D - 85156 - xbl_trng_ddi_seq D - 0 - store-logstomedia D - 0 - XBL DDR QB milestone call D - 1373 - xbl_map_smem D - 0 - boot_smem_debug_init D - 5704 - sbl1_smmu_init D - 8601 - boot_smem_init D - 305 - boot_ddr_share_data_to_aop D - 122 - boot_populate_ddr_details_shared_table D - 0 - boot_recovery_partitions_info_smem_init B - 621986 - MIPC & DARE DISABLED D - 335 - boot_update_ram_partition_table B - 622566 - Pimem init cmd, entry B - 625921 - (50000e) D - 3324 - Pimem init cmd, exit B - 639920 - External heap init, Start B - 640530 - External heap init, End D - 28365 - sbl1_post_ddr_init D - 0 - sbl1_hw_init_secondary B - 651510 - DDR - Image Load, Start D - 3691 - boot_post_ddr_dtb_load D - 0 - imageinfo_init D - 0 - boot_fmf_license_load_and_verify B - 656390 - HYP_AC_CFG - Image Load, Start D - 9973 - Auth Metadata D - 13329 - HYP_AC_CFG - Image Loaded, Delta - (72448 Bytes) B - 670115 - usb: UFS Serial - 568785f8 D - 427 - boot_usb_update_serial D - 0 - boot_usb_handle_charger D - 305 - sbl1_hw_platform_smem D - 0 - ramdump_load_cancel B - 671915 - RamDump - Image Load, Start D - 274 - RamDump - Image Loaded, Delta - (0 Bytes) B - 672494 - QUPFW - Image Load, Start D - 10095 - Auth Metadata D - 26078 - QUPFW - Image Loaded, Delta - (51707 Bytes) B - 745420 - DCP_DTB - Image Load, Start D - 2989 - Auth Metadata D - 12047 - DCP_DTB - Image Loaded, Delta - (23845 Bytes) B - 757742 - DCP - Image Load, Start D - 3081 - Auth Metadata D - 21197 - DCP - Image Loaded, Delta - (707801 Bytes) D - 0 - boot_update_abnormal_reset_status D - 0 - boot_cache_set_memory_barrier D - 31 - boot_smem_alloc_for_minidump D - 0 - boot_shrm_mini_dump_init D - 61 - boot_minidump_register_regions D - 183 - boot_smem_store_pon_status D - 30 - boot_clock_init_rpm D - 0 - boot_vsense_copy_to_smem D - 366 - sbl1_tlmm_init D - 0 - sbl1_efs_handle_cookies B - 783514 - PM: Orne attach B - 810110 - PM: PM Total Mem Allocated: 11498 D - 27786 - sbl1_pm_aop_pre_init_wrapper B - 811574 - AOP Config - Image Load, Start D - 3019 - Auth Metadata D - 11590 - AOP Config - Image Loaded, Delta - (18391 Bytes) B - 823469 - AOP - Image Load, Start D - 10126 - Auth Metadata D - 36692 - AOP - Image Loaded, Delta - (340958 Bytes) B - 860466 - TZ_AC_CFG - Image Load, Start D - 9943 - Auth Metadata D - 12962 - TZ_AC_CFG - Image Loaded, Delta - (56064 Bytes) B - 873733 - SOCCP_DTB - Image Load, Start D - 3019 - Auth Metadata D - 11773 - SOCCP_DTB - Image Loaded, Delta - (87896 Bytes) B - 885781 - SOCCP - Image Load, Start D - 3111 - Auth Metadata D - 47763 - SOCCP - Image Loaded, Delta - (2473261 Bytes) B - 934184 - SOCCP_DEBUG - Image Load, Start D - 10035 - Auth Metadata D - 30744 - SOCCP_DEBUG - Image Loaded, Delta - (43198 Bytes) D - 0 - dump dependency ready B - 965752 - SOCCP_DCD - Image Load, Start D - 3111 - Auth Metadata D - 5764 - SOCCP_DCD - Image Loaded, Delta - (12612 Bytes) B - 971821 - PDP_CDB - Image Load, Start D - 3019 - Auth Metadata D - 5673 - PDP_CDB - Image Loaded, Delta - (4729 Bytes) B - 977738 - PDP - Image Load, Start D - 10126 - Auth Metadata D - 24736 - PDP - Image Loaded, Delta - (349980 Bytes) D - 0 - boot_prepare_cpucp B - 1002992 - CPUCP_DTB - Image Load, Start D - 3050 - Auth Metadata D - 5948 - CPUCP_DTB - Image Loaded, Delta - (8792 Bytes) B - 1009184 - CPUCPFW - Image Load, Start D - 10187 - Auth Metadata D - 23546 - CPUCPFW - Image Loaded, Delta - (442300 Bytes) B - 1032943 - PGS-44729: CPBL patch detected D - 244 - boot_reset_cpucp B - 1033431 - TZ_QTI_Config - Image Load, Start D - 10034 - Auth Metadata D - 13847 - TZ_QTI_Config - Image Loaded, Delta - (117504 Bytes) B - 1047522 - QSEE Dev Config - Image Load, Start D - 3080 - Auth Metadata D - 7747 - QSEE Dev Config - Image Loaded, Delta - (53160 Bytes) B - 1055513 - QSEE - Image Load, Start D - 10888 - Auth Metadata D - 78507 - QSEE - Image Loaded, Delta - (4157936 Bytes) D - 1373 - sbl1_hw_play_vibr D - 122 - sbl1_smmuv2_fault_scan B - 1136308 - SEC - Image Load, Start D - 335 - SEC - Image Loaded, Delta - (64 Bytes) B - 1136887 - QHEE - Image Load, Start D - 10248 - Auth Metadata D - 26718 - QHEE - Image Loaded, Delta - (1510336 Bytes) B - 1163849 - APPSBL - Image Load, Start D - 3111 - Auth Metadata D - 41572 - APPSBL - Image Loaded, Delta - (5246840 Bytes) B - 1206244 - SBL1, End D - 1055788 - SBL1, Delta S - Flash Throughput, 233701 KB/s (16359138 Bytes, 70035 us) S - DDR Frequency, 2092 MHz UEFI Start [ 1393] - 0x0C4C01000 [ 1408] Sec.efi ASLR : ON DEP : ON (RTB) Timer Delta : +1 mS RAM Entry 0 : Base 0x0080000000 Size 0x0001240000 RAM Entry 1 : Base 0x0081300000 Size 0x0000100000 RAM Entry 2 : Base 0x0081960000 Size 0x0000C40000 RAM Entry 3 : Base 0x00D6E00000 Size 0x0001229000 RAM Entry 4 : Base 0x00D8800000 Size 0x0000000000 RAM Entry 5 : Base 0x00DFBB0000 Size 0x0020450000 RAM Entry 6 : Base 0x0880000000 Size 0x002F8FE000 RAM Entry 7 : Base 0x08B0000000 Size 0x0009900000 RAM Entry 8 : Base 0x0980000000 Size 0x0180000000 RAM Entry 9 : Base 0x08C0000000 Size 0x00C0000000 RAM Entry 10 : Base 0x08B9B00000 Size 0x0001E00000 RAM Entry 11 : Base 0x0082600000 Size 0x0053DD0000 RAM Available : 12067 MB (0x02F23C7000) RAM Installed : 12288 MB (0x0300000000) Using DT Legeacy Lib start creat dtb hash table..blob address[81A04000] end create dtb hash table..creat hash table cost time:[18991]..total node:[1062] DTB config : client[0]..trace[0]..verbose[0] Minidump : ON WARN: Functional cores hardcoded for target Multithread : ON (Lib ver 1.3) CPU Cores : 8 (init 2) Init 1 aux cores of 7 Init CPU core 1 Continue booting UEFI on Core 0 > Scheduler up on Core 1 CONF File : uefiplatLA.cfg UEFI Ver : 6.0.260804.BOOT.MXF.2.5.3-00337.1-KAANAPALI-1 Build Info : 64b Aug 4 2026 11:23:40 Boot Device : UFS PROD Mode : FALSE Retail : FALSE - 0x0C1ECC000 [ 1881] DxeCore.efi Loading DxeCore at 0x00C1ECC000 EntryPoint=0x00C1ECD000 - 0x0C1E61000 [ 1884] EnvDxeEnhanced.efi - 0x0C1E58000 [ 1884] RscRtDxe.efi - 0x0C1991000 [ 1884] SCHandlerRtDxe.efi - 0x0C1E4C000 [ 1885] TimestampDxe.efi - 0x0C1989000 [ 1885] RuntimeDxe.efi - 0x0C1E44000 [ 1885] QcomWDogDxe.efi HW Wdog Setting from PCD : Enabled HW Wdog Enabled - 0x0C1E35000 [ 1885] ArmCpuDxe.efi - 0x0C1E2C000 [ 1886] ArmGicDxe.efi - 0x0C1E25000 [ 1886] MetronomeDxe.efi - 0x0C1E1E000 [ 1886] ArmTimerDxe.efi - 0x0C1E14000 [ 1886] MotBootFlagsDxe.efi - 0x0C1E0C000 [ 1886] OfflineCrashDumpDxe.efi - 0x0C1DF8000 [ 1886] MotBuildConfigDxe.efi - 0x0C1DEE000 [ 1886] SmemDxe.efi - 0x0C1D9D000 [ 1887] DALSys.efi - 0x0C1D95000 [ 1887] HWIODxeDriver.efi - 0x0C1D88000 [ 1887] ChipInfo.efi - 0x0C1D80000 [ 1887] PlatformInfoDxeDriver.efi - 0x0C1D73000 [ 1887] HALIOMMU.efi - 0x0C1D5F000 [ 1889] ULogDxe.efi - 0x0C1D57000 [ 1890] CmdDbDxe.efi - 0x0C1D4F000 [ 1890] PwrUtilsDxe.efi - 0x0C1D3C000 [ 1890] NpaDxe.efi - 0x0C1D2C000 [ 1891] RpmhDxe.efi - 0x0C1D21000 [ 1891] MailboxDxe.efi mbox_os_init: Failed to locate SCM protocol for Mailbox 14 **** - 0x0C1D17000 [ 1891] QcomScmiDxe.efi - 0x0C1D0B000 [ 1892] CalibrationDxe.efi SLT Platform Key not found: 14 SCMI error: ProtocolId = 0x80, MessageId = 0x13, error = -1 Warning: calibration complete notification to PDP0 failed SCMI error: ProtocolId = 0x80, MessageId = 0x13, error = -1 Warning: calibration complete notification to PDP1 failed - 0x0C1CF9000 [ 1931] VcsDxe.efi - 0x0C1947000 [ 1931] ClockDxe.efi - 0x0C1CC8000 [ 1941] ICBDxe.efi - 0x0C193E000 [ 1941] ShmBridgeDxeLA.efi - 0x0C1930000 [ 1942] ScmDxeCompat.efi IsArmV8Smc() return TRUE - 0x0C1924000 [ 1944] DALTLMM.efi - 0x0C191C000 [ 1944] Qup.efi Lockinit failed Bad Buffer Size - 0x0C1900000 [ 1944] I2C.efi - 0x0C18F2000 [ 1944] SPMI.efi - 0x0C18E9000 [ 1974] ResetRuntimeDxe.efi - 0x0C18AA000 [ 1974] PmicDxe.efi BUS_ID 0: PM0: 74, PM1: 73, PM3: 70, PM5: 70, PM6: 70, PM7: 86, PM8: 70, PM10: 72, BUS_ID 1: =============== PM0 PON REASONS =============== ON_REASON: "PON_SEQ" OFF_REASON: "RAW_DVDD_RB_OCCURED" "RAW_XVDD_RB_OCCURED" PON_REASON1: "USB_CHG" "HARD_RESET" POFF_REASON1: "PS_HOLD" WARM_RESET_REASON1: =============== SPARE REGISTERS =============== DVDD_0: 0x04: "FASTBOOT" DVDD_1: 0x00 XVDD_0: 0x00: SOFT_0: 0x04: "FASTBOOT_MODE" - 0x0C189F000 [ 2007] DiskIoDxe.efi - 0x0C1892000 [ 2008] PartitionDxe.efi - 0x0C188B000 [ 2008] EnglishDxe.efi - 0x0C1880000 [ 2008] FvSimpleFileSystem.efi - 0x0C1853000 [ 2008] UFSDxe.efi Primordial_getRegionInfo..... addr 0xC1BD1000 len 0x23000 perm 0x20000006..... Primordial_getRegionInfo..... addr 0xC1B8F000 len 0x41000 perm 0x20000006..... - 0x0BF117000 [ 2061] Fat.efi - 0x0BF0F4000 [ 2061] TzDxeLA.efi - 0x0BF062000 [ 2063] VariableDxe.efi Embedded Commonlibs loaded LoadSecureApps: Load app from partition(keymaster): Status = 0x0, AppId = 4294901761 variable policy engine disabled - 0x0BF108000 [ 2175] ProvDxe.efi LoadImageFromPartition(Prov) calling seccussfully, return: Success - 0x0BDC01000 [ 2184] MotStorageDxe.efi - 0x0BDC25000 [ 2184] MotUtagsDxe.efi - 0x0BDBD4000 [ 2184] MotUtagsDictDxe.efi - 0x0BDB81000 [ 2185] MotHwIdDxe.efi [ 2185] HWID GPIOs (105, 107, 0) [ 2185] motorola_id_init, Start [ 2246] product ID = J, hardware ID = E - 0x0BDB72000 [ 2253] WatchdogTimer.efi - 0x0BDB57000 [ 2253] SecurityStubDxe.efi - 0x0BDB79000 [ 2254] EmbeddedMonotonicCounter.efi - 0x0BDB4E000 [ 2254] RealTimeClock.efi InitializeRealTimeClock: using default timezone/daylight settings - 0x0BDB27000 [ 2255] DevicePathDxe.efi - 0x0BDB46000 [ 2255] CapsuleRuntimeDxe.efi - 0x0BDAE2000 [ 2255] HiiDatabase.efi - 0x0BDB3D000 [ 2256] FontDxe.efi - 0x0BDA05000 [ 2258] QcomBds.efi Mounted FAT Volume: logfs Logger: saving log file CurBoot.txt PMIC RTC TimeInSeconds 628 Time offset 1785578660 [ 2271] get_mbm_fdt: Found best fdt @ 0x35F0 Logger: suspicious log piece, StartPos 0x81CE4000 EndPos 0x81CE8804 Logger: saving log file Log03.txt, cycle 3, BootCycleSuccess 2 Logger: suspicious huge Log piece size 0x4804 - 0x0BDA4D000 [ 2279] SPI.efi - 0x0BDA87000 [ 2279] HSUART.efi - 0x0BD9DC000 [ 2279] GpiDxe.efi - 0x0BDA9B000 [ 2282] VerifiedBootDxe.efi Smc Invoke call failed ret 0xB QCOM_Hibernate_CacheData: IClientEnv_open - Fail, nReturn = 11 - 0x0BDAC1000 [ 2283] RscDxe.efi Error: Image at 000BDAC1000 start failed: No mapping - 0x0BDAC1000 [ 2286] IPCCDxe.efi - 0x0BDABA000 [ 2286] FMFDxe.efi Smc Invoke call failed ret 0x10 Device SKU-ing failed - feature is disabled! If this feature is required, please enable "OEM_SKU_ready" via devcfg. RemoteObj_invoke count 1 FMF DeferredSKU failed - 7 Error: Image at 000BDABA000 start failed: Device Error - 0x0BD993000 [ 2290] SdccDxe.efi - 0x0BD9D0000 [ 2300] DDRInfoDxe.efi - 0x0BD9C1000 [ 2301] MotCoreServicesDxe.efi - 0x0BD985000 [ 2302] AbDxe.efi Multi Slot boot is supported - 0x0BD9FD000 [ 2303] FeatureEnablerDxe.efi Smc Invoke call failed ret 0x17 QseeResponse->result = 0xE Status = 0x7 Smc Invoke call failed ret 0x17 QseeResponse->result = 0xE Status = 0x7 Smc Invoke call failed ret 0x17 QseeResponse->result = 0xE Status = 0x7 Smc Invoke call failed ret 0x17 QseeResponse->result = 0xE Status = 0x7 LoadImageFromPartitionUsingGuid Failed: 14 Failed to start featenabler_a TA, status = 14 - 0x0BD8AC000 [ 2306] DisplayDxe.efi [ 2307] get_mbm_fdt: Found best fdt @ 0x35F0 Unable to get DisplayPanelDetectionResult, Not Found Unable to get primary Panel Detection Status success to locate pmic pwron protocol: Success long_key_check_in_advence is set PM: PM_DT_PARSING_ERR: charger DisplayDxe: sPlatformParams.DualDisplay = 0 DisplayDxe: Panel0 index get from dts (Index: 0) DisplayDxe: Panel0 index get from dts (Index: 0)--(boe_ili97701A_682_1440x3168_dsc_cmd_v1) dsiDriver read dsiStatus: 0xD, uHostError: 0x0, uPanelError: 0x0 dsiDriver write packet size 8 error dsiStatus: 0xD, uHostError: 0x10000 dsiDriver write packet size 8 error dsiStatus: 0xD, uHostError: 0x0 dsiDriver write packet size 8 error dsiStatus: 0xD, uHostError: 0x10000 dsiDriver write packet size 8 error dsiStatus: 0xD, uHostError: 0x0 Skipping reading Reg: 0xA1 for Panel ID 1 as already readed Skipping reading Reg: 0xA1 for Panel ID 2 as already readed Skipping reading Reg: 0xA1 for Panel ID 3 as already readed dsiDriver write packet size 8 error dsiStatus: 0xD, uHostError: 0x10000 dsiDriver write packet size 8 error dsiStatus: 0xD, uHostError: 0x0 dsiDriver write packet size 8 error dsiStatus: 0xD, uHostError: 0x10000 dsiDriver write packet size 8 error dsiStatus: 0xD, uHostError: 0x0 dsiDriver write packet size 8 error dsiStatus: 0xD, uHostError: 0x10000 dsiDriver write packet size 8 error dsiStatus: 0xD, uHostError: 0x0 dsiDriver write packet size 8 error dsiStatus: 0xD, uHostError: 0x10000 dsiDriver write packet size 8 error dsiStatus: 0xD, uHostError: 0x0 dsiDriver write packet size 8 error dsiStatus: 0xD, uHostError: 0x10000 dsiDriver write packet size 8 error dsiStatus: 0xD, uHostError: 0x0 Skipping reading Reg: 0xA1 for Panel ID 6 as already readed sure debug uDetectResult = 1 sure debug uDetectResult = 1 Panel 0 auto detection status: 1 MDPLib: MDPPlatformConfigure(MDPPLATFORM_CONFIG_GETPANELCONFIG) failed! - 0x0BD9B7000 [ 3146] PILProxyDxe.efi - 0x0BD940000 [ 3147] PILDxe.efi - 0x0BD97B000 [ 3152] SPSSDxe.efi SPSSLib:: SPSSLib_CreatePMICClients vreg_sp npa client creation failed! SPSSLib:: SPSSLib_LoadSPSS Creating PMIC clients failed: 0xE Error: Image at 000BD97B000 start failed: Not Found - 0x0BD962000 [ 3155] GlinkDxe.efi - 0x0BD97D000 [ 3155] PrintDxe.efi - 0x0BD923000 [ 3156] PmicGlinkDxe.efi - 0x0BD973000 [ 3156] UsbPwrCtrlDxe.efi UsbPwrCtrlLibPmSchg_GetChgPmicInfo::UsbPwrCtrlLibPmSchg_GetChgPmicInfo PortNums = 1 - 0x0BD869000 [ 3157] QcomChargerDxeLA.efi 3, ChargerLib:: ChargerLib_InitFileLog ChargerLib:: ChargerLib_InitFileLog InitFileLog SUCCESS MaxLogFileSize = (400000) ULogFile: Max log file size is 0x400000 Logs will be stored in LOGFS:\ ULogFile_IncrementBootCount: Couldn't open boot count file ULogFile_Open: ERROR: Failed to open file LOGFS:\ChargerLog.txt 3, ChargerLib:: ChargerLibTarget_HWInit PlatformType = 8 has Static PlatHWConfig = 1 3, ChargerLib:: ChargerLibTarget_HWInit PlatformType = 8: ChargerHW = 1, GaugeHW = 1 3, QcomChargerDxe:: ChargerPlatform_Init Successfully initialized ChargerLibCommon Success - 0x0BD897000 [ 3574] ChargerExDxe.efi - 0x0BCC09000 [ 3575] UsbfnDwc3Dxe.efi - 0x0BD8A1000 [ 3575] XhciPciEmulation.efi - 0x0BCBF2000 [ 3576] XhciDxe.efi - 0x0BCBDD000 [ 3576] UsbBusDxe.efi - 0x0BD88A000 [ 3577] UsbKbDxe.efi - 0x0BCC27000 [ 3577] UsbMassStorageDxe.efi - 0x0BCBC0000 [ 3578] UsbDeviceDxe.efi - 0x0BCB8D000 [ 3578] UsbConfigDxe.efi UsbConfigInit: USB platform 8, ver 65536, sub 0 qcom repeater found : 0x0 usb_redriver_init, Disable: 0x0 3, ChargerLib:: ChargerLibTarget_GetBatteryID batt_id_from_sdam = 101000 3, ChargerLib:: ChargerLibTarget_GetBatteryID BATT_ID_2 = 101000 3, ChargerLib:: ChargerLib_GetBatteryID BATT_ID_2 = 101000 3, ChargerLib:: ChargerLib_GetBatteryType Battery type = 0 3, ChargerLib:: ChargerLibTarget_IsChargingSupported PlatformType = 8: ChargerHW = 1, GaugeHW = 1 3, ChargerLib:: ChargerLibTarget_IsChargingSupported Support Charging = 1 3, ChargerLib:: ChargerLib_IsChargingSupported Support Charging = 1 ChargerExProtocol:: EFI_ChargerExGetChargerPresence USBIn source detected UsbConfigInit: UsbPwrCtrl No. of Ports = 1 ConnectSts : Attach, Data Role : UFP (DEVICE Mode), Lane : CC1, CoreNum : 0 Reset notification not located, Status:Not Found LocateProtocol failed, calling CreateEvent and RegisterProtocolNotify Status:Protocol Error - 0x0BCBD2000 [ 3584] ButtonsDxe.efi ButtonsDxeTest: Keypress SDAM data payload 0 - 0x0BCBB6000 [ 3585] TsensDxe.efi - 0x0BCB62000 [ 3586] CPRDxe.efi - 0x0BCB03000 [ 3594] UCDxe.efi - 0x0BCB84000 [ 3601] RngDxe.efi - 0x0BCB7C000 [ 3602] SimpleTextInOutSerial.efi - 0x0BCB58000 [ 3603] ConPlatformDxe.efi - 0x0BCB3D000 [ 3603] ConSplitterDxe.efi - 0x0BCB32000 [ 3604] GraphicsConsoleDxe.efi - 0x0BCAF9000 [ 3605] ASN1X509Dxe.efi - 0x0BCAEF000 [ 3605] SecRSADxe.efi - 0x0BCACE000 [ 3606] MbmModeDxe.efi [ 3606] get_mbm_fdt: Found best fdt @ 0x35F0 EXT4 features: 0x2C, 0x42, 0x7B root inode: i_flags 0x80000 Go to fastboot mode due to spare reg flag - 0x0BCAE8000 [ 3608] MotSolDxe.efi Unable to get DisplayPanelDetectionResultSec, Not Found EnvDxe SplashScreenRenderCallbacknMmiRenderSplashScreen: logo=0 Primary display resolution: 0 x 0 DAP version: 10,2 (flags: 0x1) DAP sector size: 0x200 Blkdev: [0] super, sz 0x54D800000, start sec 0x800 Groups: [0] default, sz 0x0 [1] mot_dp_group_a, sz 0x54D400000 free sz: 0x4BF9C0000 [2] mot_dp_group_b, sz 0x54D400000 free sz: 0x4BF9C0000 Partitions: [0] odm_a, a=0x1, i=0, n=1, g=1, sz 0x1166D000 [1] odm_b, a=0x1, i=1, n=0, g=2, sz 0x0 [2] product_a, a=0x1, i=1, n=1, g=1, sz 0x10179000 [3] product_b, a=0x1, i=2, n=0, g=2, sz 0x0 [4] system_a, a=0x1, i=2, n=1, g=1, sz 0x20911000 [5] system_b, a=0x1, i=3, n=1, g=2, sz 0x354000 [6] system_dlkm_a, a=0x1, i=4, n=1, g=1, sz 0x319D000 [7] system_dlkm_b, a=0x1, i=5, n=0, g=2, sz 0x0 [8] system_ext_a, a=0x1, i=5, n=1, g=1, sz 0x123ED000 [9] system_ext_b, a=0x1, i=6, n=0, g=2, sz 0x0 [10] vendor_a, a=0x1, i=6, n=1, g=1, sz 0x34517000 [11] vendor_b, a=0x1, i=7, n=0, g=2, sz 0x0 [12] vendor_dlkm_a, a=0x1, i=7, n=1, g=1, sz 0x1B54000 [13] vendor_dlkm_b, a=0x1, i=8, n=0, g=2, sz 0x0 [ 3611] get_mbm_fdt: Found best fdt @ 0x35F0 load_logo find [logo_boot], match_idx=0 load_logo name=[logo_boot], w:h=[0:0] DisplayUtils: Invalid inputs of horizontal / vertical resolution. RenderSplashScreen: primary render error code Invalid Parameter Primary displayId=0, logo size=13685814, flags=0 Secondary display resolution: 0 x 0 EnvDxe Render Callback - 0x0BCAB4000 [ 3619] BacklightDxe.efi PM_DEVICE_1 GetBatteryStatus: Voltage = 4021 mV [ 3620] get_mbm_fdt: Found best fdt @ 0x35F0 BacklightDxe PowerKey_powerup_Threshold = 3200 - 0x0BCB4A000 [ 3621] RmVmDxe.efi - 0x0BCAA1000 [ 3622] QRKSDxe.efi RemoteObj_invoke count 1 - 0x0BCA9A000 [ 3637] PsStateDxe.efi RemoteObj_invoke count 1 - 0x0BCAAA000 [ 3638] Smp2pDxe.efi - 0x0BCA71000 [ 3639] UsbMsdDxe.efi - 0x0BCA89000 [ 3639] UsbInitDxe.efi - 0x0BCA52000 [ 3640] FvDxe.efi - 0x0BCA69000 [ 3640] ParserDxe.efi BDS Entry [ 3640] WaitParallelThreads InIt [ 3642] EnvDxe SplashScreenRenderCallbacknMmiRenderSplashScreen: logo=0 Primary display resolution: 0 x 0 load_logo find [logo_boot], match_idx=0 load_logo name=[logo_boot], w:h=[0:0] DisplayUtils: Invalid inputs of horizontal / vertical resolution. RenderSplashScreen: primary render error code Invalid Parameter Primary displayId=0, logo size=13685814, flags=0 Secondary display resolution: 0 x 0 EnvDxe Render Callback Reset notification not located, Status:Not Found Boot Cycle : 2 Run Cycle : 2 UEFI Ver : 6.0.260804.BOOT.MXF.2.5.3-00337.1-KAANAPALI-1 Platform : MTP Subtype : 0 Boot Device : UFS Chip Name : SM8845 Chip Ver : 1.0 Chip Num : 0x11A45995 Chip ECID : 0x047B11A45995 SKU ID : 0x2 P_Code : 0x1 TME_SEQ_PATCH_VERSION : 0x1 Boot Core : 1651 MHz ----------------------------- QUANTUM SDK DT node not found: -1, skipping.. Quantum Sdk failed to load. Status : Device Error Successfully read Quantum entry flag val: 0 pil-abl Done t=58ms s=1ms a=8ms f=47ms d=0ms UEFI Total : 2336 ms POST Time [ 3729] OS Loader Total FreeMem available : 10419 MB Max Contiguos FreeMem available : 9216 MB - 0x0BC445000 [ 3740] MotoBootModule.efi [ 3742] get_mbm_fdt: Found best fdt @ 0x35F0 [ 3744] I - MBM version is MBM-3.0-eletre_factory-981b9c08d595-dirty-260804-WWX36V-835ee2 [ 3744] I - Power up reason is: 0x00004000 ("reboot") detected buffer overflow in StrnCpyS, line 314 detected buffer overflow in StrnCpyS, line 314 GetRunningBLSlotSuffix: Bypassing GUID check for xbl_ac_config_a GetRunningBLSlotSuffix: Bypassing GUID check for tme_config_a GetRunningBLSlotSuffix: Bypassing GUID check for tme_fw_a GetRunningBLSlotSuffix: Bypassing GUID check for xbl_config_a GetRunningBLSlotSuffix: Bypassing GUID check for xbl_a Currently running bootloader is from BOOT LUN: 1, slot: _a/_a Total DDR Size: 0x00000002F23C7000 Locate EFI_SOFTSKU_Protocol failed, Status = (0xE) SSM using extended UID prov: app ID -65533 detected buffer overflow in StrnCpyS, line 314 prov enabled = 1 VB: Non-secure device: Security State: (0xFFF3F) VB: RWDeviceState: Succeed using devinfo! [ 3761] I - CID_init read and validate fail!! [ 3761] I - SSM: SSM loaded CID=65535 [ 3766] I - SOD: initializing... [ 3769] I - SOD: RAM dump feature is enabled [ 3769] I - SOD: RAM dump mode is both [ 3770] E - sod_flags_sponsor: failed to read utag [cmdl] [ 3770] I - read init reboot command failed target_enable_resin_and_kpdpwr_warm_reset: PON access is disabled by DTS! target_disable_resets: PON access is disabled by DTS! [ 3770] RAM: UNKNOWN, LP5, 0x300000000 Bytes [ 3770] C - next_valpair: value size mismatch [ 3770] C - parse_auto_rule_uspace: utag [esimid] empty [0] - skip auto detect [ 3770] C - utag_autodetect_cb: failed to autodetect value for [esimid] Failed to get the width of the screen. Failed to get the height of the screen. Failed to get width or height [ 3770] E - sod_flags_sponsor: failed to read utag [cmdl] [ 3770] E - sod_flags_sponsor: failed to read utag [cmdl] [ 3770] I - Entering fastboot mode [ 3770] I - Fastboot Reason: Reboot mode set to fastboot Fastboot Build Info: Aug 4 2026 11:47:06 UsbStartController: Starting Core 0 in mode: 4 usb_repeater_reset, core_num : 0x0 usb_repeater_reset, core_num : 0x0 0x144: 0x4 0x144: 0xA8 ssusb_phy_init_success lane: 0x0 Fastboot: Initializing... [ 3844] I - Serial number: "N9PC220656" Fastboot: Processing commands [ 3854] E - sod_flags_sponsor: failed to read utag [cmdl] [ 3890] RAM: UNKNOWN, LP5, 0x300000000 Bytes Unable to get DisplayPanelName, Not Found ChargerExProtocol:: EFI_ChargerExGetChargerPresence USBIn source detected 3, ChargerLib:: ChargerLibTarget_GetBatteryStatus use PmicFgProtocol 3, ChargerLib:: ChargerLibTarget_GetBatteryID batt_id_from_sdam = 101000 3, ChargerLib:: ChargerLibTarget_GetBatteryID BATT_ID_2 = 101000 3, ChargerLib:: ChargerLibTarget_GetBatteryType Battery type = 0 3, ChargerLib:: ChargerLibTarget_GetBatteryID batt_id_from_sdam = 101000 3, ChargerLib:: ChargerLibTarget_GetBatteryID BATT_ID_2 = 101000 ChargerLibTarget_ValidateAndGetOcv: re-estimate using pon_ocv == 3897 mV, set soc=15 3, QcomChargerDxe:: EFI_QcomChargerGetChargerConfig CfgKey = 0 Value = 3300 [ 3916] I - Kernel console : null [ 3920] I - Tools Mode Config: ENABLED Primary display resolution: 0 x 0 [ 3925] Using droid_operation load_image name=[dodoeain], w:h=[0:0] DisplayUtils: Invalid inputs of horizontal / vertical resolution. display_image: render error code 2 Primary display resolution: 0 x 0 [ 3926] Using arrows load_image name=[arw], w:h=[0:0] DisplayUtils: Invalid inputs of horizontal / vertical resolution. display_image: render error code 2 Primary display resolution: 0 x 0 [ 3927] Using start load_image name=[sat], w:h=[0:0] DisplayUtils: Invalid inputs of horizontal / vertical resolution. display_image: render error code 2 CallBack: 0xBC550980 [ 3930] MotoBootModule.dll WARN: ExecTime: 73 ms USB status: connected ChargerExProtocol:: EFI_ChargerExGetChargerPresence USBIn source detected 3, ChargerLib:: ChargerLibTarget_GetBatteryStatus use PmicFgProtocol 3, ChargerLib:: ChargerLibTarget_GetBatteryID batt_id_from_sdam = 101000 3, ChargerLib:: ChargerLibTarget_GetBatteryID BATT_ID_2 = 101000 3, ChargerLib:: ChargerLibTarget_GetBatteryType Battery type = 0 3, QcomChargerDxe:: EFI_QcomChargerGetChargerConfig CfgKey = 0 Value = 3300 backlight_control: No DisplayPwrCtrlProtocol! UsbfnDwcCoreCableStatus: Cable Attached get_config_usb_speed_type: get usb speed config node fail Dev_Common_Speed: Dev Bus Speed: High, state 2 [ 7517] I - cmd: oem config once_shipmode true [ 7522] I - cmd: oem config once_shipmode ConnectSts : Detach, Data Role : UNKNOWN, Lane : OPEN, CoreNum : 0 HandlePortPartnerXtach: Cable Detach coreNum 0 mode 4 UsbfnDwcCoreCableStatus: Cable Detached Kill via Factory! [ 7668] get_mbm_fdt: Found best fdt @ 0x35F0 is_moto_shipmode_support: not support external shipmode IC by DTS! set wait_exit_shipmode utag backlight_control: No DisplayPwrCtrlProtocol! panel_power_control: No DisplayPwrProtocol! fastboot exit code 83 pmic_glink_Link_State_NotifCb:: GLINK_LINK_STATE_UP remote ss = soccp transport name = SMEM pmic_glink_Init:: glink is up, retry count = 0. pmic_glink_state_change:: got state_change event = 0 pmic_glink_state_change:: IsPMICChannelOpen = 1 pmic_glink_state_change:: queue Rx Intent success. status = Success pmic_glink_state_change:: queue Rx Intent success. status = Success pmic_glink_state_change:: queue Rx Intent success. status = Success pmic_glink_state_change:: queue Rx Intent success. status = Success pmic_glink_state_change:: queue Rx Intent success. status = Success pmic_glink_state_change:: queue Rx Intent success. status = Success pmic_glink_open:: success, retry count = 0. pmic_glink_tx:: glink tx failed status = Compromised Data.ret = -13 pmic_glink_state_change:: got state_change event = 1 pmic_glink_state_change:: glink channel local disconnected. INFO: Received ResetSytem request. INFO: Type :0x2 INFO: DataSize :0x0 Start EBS [ 7861] Exit USB monitor timer Mode set is already in progress, don't allow another call DisplayDxe: execution time(0us) total time(0us) Logger: last time saving dirty log